verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX250

The AirTAC SE80 Standard Cylinder SE80AX250 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 250mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke250 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$196.78 $204.28Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX250

The AirTAC SE80AX250 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 80 mm bore and 250 mm stroke. It leverages a hard-chrome plated SUS420J2 stainless steel rod (option A) to resist corrosion in washdown or chemically exposed settings, while delivering a robust 2513 N push force at 0.5 MPa.

The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that integrates seamlessly into ISO 15552 footprints. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration for fast 30-800 mm/s cycles, protecting machinery from harsh mechanical impacts.

Airtac SE80 Standard Cylinder SE80AX250 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX250
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke250 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX250

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX250 Is Used

packaging

Palletizer Strapping

Drives a 250 mm stroke strapping head on an end-of-line palletizer, using its 2513 N push force to tension steel bands securely around heavy palletized goods.

science

Washdown Conveyor Diverter

Actuates a flow diverter gate on a food-grade conveyor, relying on the SUS420J2 stainless steel rod to withstand daily high-pressure caustic washdowns without pitting.

factory

Injection Mold Ejection

Ejects molded plastic parts from a 250 mm deep cavity, utilizing the adjustable pneumatic cushioning to soften the retraction stop and protect delicate mold tooling.

Is the Airtac SE80 Standard Cylinder SE80AX250 the Right Cylinder?

Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore is a powerhouse; if you need less force, step down to the 63 mm bore (1559 N push), or step up to the 100 mm bore (3927 N push) for heavier loads. Because this SKU lacks a built-in magnet (-S), it cannot host CMSE or DMSE position sensors, so external limit switches are required for end-of-stroke detection. Additionally, this plain cylinder will drift if air pressure is lost—use a BSE rod lock variant if your application requires fail-safe load holding. With a 250 mm stroke, the 25 mm rod and front bearing face bending moments under lateral loads, so an external guide rail is advised to prevent premature seal wear.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX250 FAQ

The SE80AX250 generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It uses a PT3/8 port and features a 25 mm rod with an M20x1.5 thread.

Yes, the SE80AX250 is dimensionally interchangeable per ISO 15552 standards, allowing a direct replacement for other ISO 15552 cylinders using existing mounting hardware like FA or FB flanges.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX250

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX250 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.