verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX260

The AirTAC SE80 Standard Cylinder SE80AX260 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 260mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke260 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$211.46 $218.96Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX260

The AirTAC SE80AX260 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa and operates at speeds from 30-800 mm/s. Featuring a 260 mm stroke and an 80 mm bore, this unit integrates a SUS420J2 stainless steel rod (code A) specifically chosen to endure corrosive and washdown environments without compromising structural integrity.

Unlike traditional tie-rod bodies, its square extruded aluminum barrel lacks external protruding rods, yielding a completely flush exterior that simplifies mounting and prevents debris accumulation. The cylinder incorporates field-adjustable air cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a dedicated screw to eliminate hard mechanical impacts during high-speed cycles.

Airtac SE80 Standard Cylinder SE80AX260 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX260
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke260 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX260

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×260Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX260 Is Used

precision_manufacturing

CNC Machine Tooling Clamp

Applies the 2513 N push force at 0.5 MPa to secure heavy cast iron workpieces during high-speed CNC milling operations, utilizing the SUS420J2 rod to withstand occasional coolant splashes.

conveyor_belt

Pallet Diverter Arm

Drives a heavy 260 mm stroke diverter mechanism on a packaging line, leveraging the adjustable end cushions to softly decelerate the massive 80 mm bore piston when routing loaded pallets.

science

Beverage Washdown Gate

Actuates a stainless-steel routing gate in a beverage bottling plant, where the SUS420J2 rod material provides essential resistance against aggressive caustic cleaning chemicals and high humidity.

Is the Airtac SE80 Standard Cylinder SE80AX260 the Right Cylinder?

When sizing this 80 mm bore model, evaluate stepping down to the 63 mm bore (1559 N push at 0.5 MPa) for lighter loads, or stepping up to the 100 mm bore (3927 N push at 0.5 MPa) for substantially higher force requirements. Because this SKU lacks the -S magnet code, it cannot support AirTAC CMSE or DMSE position sensors; if your application requires electronic or reed switch feedback, you must select an SE variant with the -S option. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for any standard ISO 15552 cylinder, sharing identical mounting footprints and accessory interfaces.

With a 260 mm stroke, the unsupported piston rod is subject to bending forces under heavy transverse loading. To prevent premature rod-bearing wear and seal failure, incorporate an external guide rail to support the load and absorb lateral stress independently of the cylinder.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX260 FAQ

At 0.5 MPa, the SE80AX260 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It features a PT3/8 port, a 25 mm rod diameter, and an M20x1.5 rod-end thread.

No, the SE80AX260 is a standard double-acting cylinder and cannot hold a load when air is exhausted or a valve is centered; the piston will drift. The adjustable air cushion only decelerates the piston near the stroke end and does not function as a locking brake. For position holding, consider the BSE rod-lock variant or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX260

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX260 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.