Airtac SE80 Standard Cylinder SE80AX275
The AirTAC Airtac SE80 Standard Cylinder SE80AX275 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 275mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke275 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX275
The AirTAC SE80AX275 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding 80 mm bore tasks, delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames to save valuable machine space.
This specific SKU features a SUS420J2 stainless steel rod (material code A) built for corrosive and washdown environments. It operates without a position sensor magnet, but the field-adjustable air cushioning at both ends lets you precisely tune end-of-stroke deceleration to prevent hard mechanical impacts.
Airtac SE80 Standard Cylinder SE80AX275 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX275 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX275
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX275 Is Used
Palletizer Flap Control
Drives the heavy flap mechanism on end-of-line palletizers, utilizing the 2513 N push force to reliably shift loaded cardboard cartons during the packaging cycle.
Pharmaceutical Washdown Station
Actuates process doors and guarding on pharmaceutical equipment, where the SUS420J2 stainless rod provides necessary resistance to daily chemical washdowns.
Injection Mold Ejection
Provides the high clamping and ejection strokes on injection molding machines, with adjustable cushions softening the rapid 3518 N impacts at 0.7 MPa operating pressure.
Is the Airtac SE80 Standard Cylinder SE80AX275 the Right Cylinder?
Stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to a 100 mm bore increases it to 3927 N, letting you match the exact energy requirements of your cycle. Because this is a standard double-acting cylinder, it will drift if air pressure is lost—use an external rod lock or BSE variant if your application requires fail-safe load holding.
For ISO 15552 retrofits, match the 80 mm bore, 275 mm stroke, PT3/8 port, and your required mounting accessory. At 275 mm of stroke, the unsupported load can generate bending moments on the M20x1.5 rod and front bearing; always incorporate an external guide rail to prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX275 FAQ
At 0.5 MPa, the SE80AX275 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX275 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT3/8 port and an M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX275
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.