verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX290

The AirTAC SE80 Standard Cylinder SE80AX290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 290mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke290 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$211.46 $218.96Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX290

The AirTAC SE80AX290 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods entirely, yielding a smooth, flush surface that resists corrosion and simplifies mounting flush to machinery frames.

This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for superior corrosion resistance in washdown or chemically aggressive settings. Since this SKU lacks the -S magnet code, it does not support CMSE or DMSE electronic position sensors out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows you to tune deceleration precisely, softening hard impacts when moving heavy loads at high speeds.

Airtac SE80 Standard Cylinder SE80AX290 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX290
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke290 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX290

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX290 Is Used

packaging

Palletizer Flap Control

Drives heavy cardboard flap folding arms on palletizing lines, utilizing the 2513 N push force and 290 mm stroke to clear large pallet perimeters.

science

Chemical Washdown Diverter

Actuates flow diverter valves in chemical processing plants where the SUS420J2 stainless rod provides necessary resistance to corrosive washdowns.

factory

Injection Mold Ejection

Pushes heavy injection-molded automotive panels out of press tools, relying on the field-adjustable end cushions to soften the 3518 N dynamic impact at 0.7 MPa.

Is the Airtac SE80 Standard Cylinder SE80AX290 the Right Cylinder?

Selecting this 80 mm bore makes sense when you need substantial thrust; stepping down to a 63 mm bore drops the 0.5 MPa push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. Because this is a 290 mm stroke, the 25 mm rod and M20x1.5 thread carry significant side-load capacity, but an external guide is still recommended to prevent rod-bearing bending on long unsupported movements. Remember that a standard SE cylinder relies on live air pressure to hold position—the adjustable end cushions only decelerate the piston near stroke end and will not lock the load if air is lost (use a BSE rod lock for that). As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware and PT3/8 ports.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX290 FAQ

At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, it is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting interfaces and can drop in for other ISO profile cylinders. However, it cannot hold a load unpowered; the cushions only decelerate the piston near stroke end and do not act as a brake. For position holding, use a BSE rod lock variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX290

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX290 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.