Airtac SE80 Standard Cylinder SE80AX30S
The AirTAC Airtac SE80 Standard Cylinder SE80AX30S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke30 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX30S
The AirTAC SE80AX30S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous washdown and corrosive environments. It features a SUS420J2 stainless steel piston rod (code A) and delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force. The 30 mm stroke operates at speeds of 30-800 mm/s, driven through a PT3/8 port.
Unlike traditional tie-rod bodies, its square extruded aluminum barrel lacks external protrusions, yielding a compact footprint that mounts flush against machine frames while resisting contamination buildup. The integrated magnet (code S) directly supports AirTAC CMSE reed and DMSE electronic position sensing, while the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration for heavy 80 mm loads.
Airtac SE80 Standard Cylinder SE80AX30S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX30S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX30S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX30S Is Used
Bottle Rinser Inverting Arm
Leverages the 2513 N push at 0.5 MPa to grip and invert heavy beverage crates, relying on the SUS420J2 stainless rod to withstand constant moisture and caustic washdown chemicals.
Stainless Steel Press Ejector
Uses the precise 30 mm stroke to eject formed metal parts from a hydraulic press, utilizing the DMSE electronic sensor to confirm ejection completion before the robotic arm enters.
VFFS Bag Cutting Station
Actuates the rotary knife mechanism on vertical form-fill-seal machinery, where the adjustable end cushions absorb the 2268 N retract impact to prevent tearing packaging film at high cycle rates.
Is the Airtac SE80 Standard Cylinder SE80AX30S the Right Cylinder?
When sizing this 80 mm bore, stepping down to a 63 mm cylinder reduces the 0.5 MPa push to 1559 N, whereas moving up to a 100 mm bore increases it to 3927 N. This SE80AX30S is dimensionally interchangeable per ISO 15552, functioning as a drop-in replacement for other ISO 15552 cylinders while retaining the exact bore, 30 mm stroke, PT3/8 port, and standard mounting accessory pattern. Because the standard SE series lacks a mechanical lock, the piston will drift if air pressure is lost; applications requiring static load holding without live pressure should pivot to the BSE rod lock variant. Given the short 30 mm stroke, rod-bearing bending is negligible and external guides are rarely necessary.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX30S FAQ
The SE80AX30S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-800 mm/s, featuring a PT3/8 port and a 36 mm cushion length.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories. However, it does not hold position when air is lost; if static load holding is required, the BSE rod lock variant is recommended.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.