Airtac SE80 Standard Cylinder SE80AX450S
The AirTAC Airtac SE80 Standard Cylinder SE80AX450S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 450mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke450 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX450S
The AirTAC SE80AX450S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It features an extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Delivering a robust 2513 N push at 0.5 MPa, this 80 mm bore unit handles heavy linear thrust with precision.
Equipped with a SUS420J2 stainless steel rod (option A), it is tailored for corrosive or washdown environments. The integrated magnet (option S) enables seamless position detection using AirTAC CMSE reed or DMSE electronic sensors. Field-adjustable air cushioning at both ends allows you to dial in the deceleration to soften hard end stops at operating speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80AX450S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX450S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX450S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX450S Is Used
Corrugated Box Flap Folding
Drives the heavy folding arms on high-speed corrugated box formers, using the 450 mm stroke to clear the packaging path and the 2513 N thrust to cleanly crease thick cardboard.
Pallet Diverter Gate
Actuates a heavy diverter gate on a pallet handling conveyor, where the SUS420J2 stainless rod withstands ambient humidity and dust while the 80 mm bore pushes loaded skids sideways.
Injection Mold Platen Ejector
Ejects molded plastic parts from a clamped platen, relying on the adjustable end cushions to soften the 450 mm extension stop and protect fragile components from impact shock.
Is the Airtac SE80 Standard Cylinder SE80AX450S the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires substantial force; it provides 2513 N push at 0.5 MPa. If you need slightly less thrust, stepping down to the 63 mm bore yields 1559 N push, while stepping up to the 100 mm bore provides 3927 N push. This model uses a PT3/8 port and M20x1.5 rod thread, carrying higher side-load capacity than smaller bores.
Because the stroke is 450 mm, the unsupported piston rod is subject to bending under lateral loads; an external guide mechanism is recommended to prevent rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the load—if air pressure is lost, the cylinder will drift, requiring a BSE rod lock variant for true position holding. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any standard ISO 15552 cylinder using identical mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX450S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE80AX450S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with matching mounting hardware. The built-in -S magnet also allows you to mount AirTAC CMSE or DMSE sensors directly into the barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.