Airtac SE80 Standard Cylinder SE80AX475S
The AirTAC Airtac SE80 Standard Cylinder SE80AX475S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 475mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke475 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX475S
The AirTAC SE80AX475S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. Delivering a robust 2513 N push force at 0.5 MPa, it utilizes a 25 mm SUS420J2 stainless steel rod (code A) to resist corrosion in washdown or humid environments. The 475 mm stroke is driven through a PT3/8 port, while the square extruded aluminum barrel omits external tie rods for a flush, compact footprint that simplifies machine integration.
This model includes a built-in magnet (code S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. To absorb kinetic energy at stroke ends, it features field-adjustable pneumatic cushioning at both ends with a 36 mm cushion length. This allows technicians to fine-tune end-of-stroke deceleration, preventing hard mechanical impacts during high-speed 30-800 mm/s operations.
Airtac SE80 Standard Cylinder SE80AX475S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX475S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX475S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX475S Is Used
Bottling Line Diverter
Actuates high-speed lane guide rails on a beverage bottling line, utilizing the 2513 N push force and SUS420J2 stainless rod to withstand frequent washdowns.
Corrugated Box Flap Folder
Drives the heavy folding mechanism on a packaging machine, relying on the 475 mm stroke and adjustable end cushions to safely decelerate the 80 mm bore at high cycling speeds.
CNC Lathe Chip Conveyor
Indexes the waste material conveyor on a precision machining center, using the built-in magnet with DMSE electronic sensors to confirm scrap ejection positions under coolant spray.
Is the Airtac SE80 Standard Cylinder SE80AX475S the Right Cylinder?
Selecting this 80 mm bore yields 2513 N of push at 0.5 MPa, bridging the gap between the 63 mm bore (1559 N push) and the 100 mm bore (3927 N push). If your application requires holding a vertical load without live air pressure, note that a standard SE cylinder will drift and exhaust; you should evaluate the BSE rod-lock variant or an external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct drop-in replacement for other ISO 15552 cylinders, matching the 80 mm bore, 475 mm stroke, PT3/8 port, and standardized mounting accessories.
Because this 475 mm stroke creates a long unsupported rod extension, side-loading induces bending moments on the rod bearing. For optimal seal and bearing life, implement an external guide rail to absorb lateral forces and prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX475S FAQ
The 80 mm bore provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE80AX475S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders of the same bore and stroke, utilizing standard mounting accessories without modifying the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX475S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.