Airtac SE80 Standard Cylinder SE80AX600
The AirTAC Airtac SE80 Standard Cylinder SE80AX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX600
The AirTAC SE80AX600 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Built to VDMA 24562 dimensional standards, its extruded aluminum barrel omits external tie rods entirely. This clean profile prevents debris accumulation and allows flush mounting on machinery frames, while the SUS420J2 stainless steel rod specifically resists corrosion in washdown or high-humidity environments.
This 80 mm bore unit features a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread, running at speeds of 30-800 mm/s. The field-adjustable pneumatic cushioning at both ends is a true deceleration mechanism, not a fixed bumper, allowing technicians to dial in end-of-stroke damping to soften hard impacts at high cycling speeds. This SKU ships without a built-in magnet, meaning position sensing is not available out of the box.
Airtac SE80 Standard Cylinder SE80AX600 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX600 Is Used
Pallet Dispenser Pusher
Provides the 2513 N push at 0.5 MPa required to index heavy wooden pallets out of a magazine, with the SUS420J2 rod surviving abrasive dust and occasional washdowns.
Corrugator Stack Transfer
Uses the 600 mm stroke to shuttle stacked corrugated board sheets between processing lines, relying on the adjustable end cushions to stop the 80 mm bore smoothly at high speeds.
Automated Welding Gate
Actuates a heavy safety gate on a robotic welding cell where the tie-rod-free extruded barrel prevents weld spatter from snagging, and the stainless rod resists heat and splatter corrosion.
Is the Airtac SE80 Standard Cylinder SE80AX600 the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires the 2513 N push force at 0.5 MPa, bridging the gap between the 63 mm bore (1559 N push) and the 100 mm bore (3927 N push). If your load demands less force, stepping down to the 63 mm bore saves space and air consumption; if you need heavier lifting, the 100 mm bore provides substantially more thrust. Because this is a plain double-acting cylinder, the piston will drift and cannot hold a load if air pressure is lost or the valve is centered—use a BSE rod lock variant or external pilot-operated check valve if position holding is critical.
At 600 mm of stroke, the unsupported mass of the Ø25 mm rod introduces a bending moment on the rod-bearing during side loads. For this long stroke, incorporating an external guide rail is strongly recommended to prevent premature seal wear and bearing failure. When retrofitting, this profile cylinder is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting hardware like FA front flanges or TC trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX600 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, and the maximum push force is 513 kgf at 1.0 MPa. The 600 mm stroke is within the standard 1500 mm maximum stroke limit for this bore size.
No, the SE80AX600 is a standard double-acting cylinder and will drift if air is exhausted or the valve is centered. The adjustable air cushion at both ends only decelerates the piston near the stroke ends; it is not a locking mechanism. For true load holding, an AirTAC BSE series rod lock cylinder or an external mechanical brake is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.