Airtac SE80 Standard Cylinder SE80AX60S
The AirTAC Airtac SE80 Standard Cylinder SE80AX60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX60S
The AirTAC SE80AX60S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore, a 60 mm stroke, and a PT3/8 port that drives a 30-800 mm/s speed range.
This specific configuration integrates a SUS420J2 stainless steel rod (option A) for superior corrosion resistance in washdown environments, and includes a built-in magnet (option S) for seamless position sensing with AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel lacks external tie rods, keeping the body compact and flush-mountable, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration for high-speed loads.
Airtac SE80 Standard Cylinder SE80AX60S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX60S Is Used
VFFS Bag Sealing
Provides the 2513 N push force required to drive the sealing jaws on vertical form-fill-seal machines, while the SUS420J2 rod withstands frequent washdowns.
CNC Lathe Chucking
Actuates heavy pneumatic chucks for bar feeding, utilizing the 36 mm adjustable cushion to soften hard mechanical stops at high cycling speeds.
Pallet Diverters
Handles heavy pallets on packaging lines by pushing them onto parallel conveyors, using the DMSE electronic sensors for stroke verification.
Is the Airtac SE80 Standard Cylinder SE80AX60S the Right Cylinder?
If your application requires less force, the 63 mm bore neighbor provides 1559 N of push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. Remember that this standard SE cylinder does not hold loads when air pressure is lost; if your machine requires mechanical locking, consider the BSE rod lock variant. Because this is a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders using the same 80 mm bore, 60 mm stroke, PT3/8 port, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX60S FAQ
At 0.5 MPa, it provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX60S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting interface and PT3/8 port size, meaning it functions as a drop-in replacement for other ISO 15552 profile cylinders without requiring custom brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.