Airtac SE80 Standard Cylinder SE80AX650
The AirTAC Airtac SE80 Standard Cylinder SE80AX650 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 650mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke650 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX650
The AirTAC SE80AX650 is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It features an 80 mm bore and a 650 mm stroke, generating 2513 N of push force and 2268 N of pull force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting mechanical corrosion.
This specific configuration includes a SUS420J2 stainless steel rod (option A) for corrosive or washdown environments. It uses a PT3/8 port and a 25 mm rod with an M20x1.5 thread. The cylinder lacks a built-in position magnet, meaning CMSE or DMSE electronic sensors cannot be used on this SKU without modification. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for moving loads.
Airtac SE80 Standard Cylinder SE80AX650 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX650 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX650
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX650 Is Used
Palletizer Strapping
Drives the strapping and sealing head over a 650 mm reach on stainless palletizers, using 2513 N push force to tension heavy steel bands.
Washdown Dosing
Actuates chemical dosing valves in food processing lines where the SUS420J2 rod withstands daily caustic washdowns without pitting.
Press Extraction
Extracts formed aluminum blanks from a hydraulic press, relying on adjustable air cushions to soften the 650 mm stroke end stops.
Is the Airtac SE80 Standard Cylinder SE80AX650 the Right Cylinder?
Stepping down to the 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to the 100 mm bore increases it to 3927 N, letting you size precisely for the load. Because this SKU lacks the -S magnet, you will need external limit switches or a different variant if position feedback is mandatory. At 650 mm of stroke, the 25 mm rod and bearing are subject to bending moments under side loads; an external guide rail is recommended to prevent premature seal wear. As a true ISO 15552 profile cylinder, it offers a drop-in dimensional replacement for other ISO 15552 cylinders using the same PT3/8 port and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX650 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
No. The adjustable air cushion only decelerates the piston near the end of stroke; it is not a braking device. If air is lost, the piston will drift. For fail-safe load holding, consider the BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX650
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.