Airtac SE80 Standard Cylinder SE80AX750
The AirTAC Airtac SE80 Standard Cylinder SE80AX750 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX750
The AirTAC SE80AX750 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a 25 mm rod with an M20x1.5 thread. Equipped with a SUS420J2 stainless steel rod, this specific configuration is built to withstand corrosive environments and washdown procedures without compromising mechanical strength.
Unlike traditional tie-rod designs, this cylinder features a square extruded aluminum barrel that mounts flush while exposing sensor grooves on three sides. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration precisely, softening hard impacts even at operating speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80AX750 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX750 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX750
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX750 Is Used
Bottling Line Diverters
Actuates high-speed lane diverter gates on beverage bottling lines, utilizing the 2513 N thrust to overcome friction from accumulated glass containers while the SUS420J2 rod resists washdown moisture.
Corrugated Box Compression
Provides consistent downward pressure on corrugated cardboard folding mechanisms, where the 750 mm stroke accommodates varying pallet heights and the adjustable cushion protects the packaging assembly.
CNC Chip Conveyor Drive
Indexes metal chip conveyors away from machining centers, using the 80 mm bore's 3518 N push at 0.7 MPa to overcome the dead weight of accumulated steel debris across the long 750 mm travel.
Is the Airtac SE80 Standard Cylinder SE80AX750 the Right Cylinder?
This 80 mm bore generates 2513 N of push force at 0.5 MPa. If your application requires less thrust, stepping down to the 63 mm bore yields 1559 N. Conversely, scaling up to the 100 mm bore provides 3927 N. Because this unit lacks a built-in magnet, it cannot host CMSE or DMSE position sensors; if your sequence requires end-of-stroke feedback, select an SE80 model with the -S option.
With a 750 mm stroke, the 25 mm rod is highly susceptible to bending under side loads. You must use an external guide to prevent premature rod-bearing wear. Note that this standard cylinder relies on live air pressure to hold position; if air is lost, the piston drifts. For fail-safe load holding, consider the BSE rod-lock variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX750 FAQ
At 0.5 MPa, the SE80AX750 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf when operating at the maximum rated pressure of 1.0 MPa.
Yes. The SE80AX750 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface dimensions as other ISO 15552 profile cylinders. This allows for a drop-in retrofit using your existing mounting hardware and PT3/8 air connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX750
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.