Airtac SE80 Standard Cylinder SE80AX750S
The AirTAC Airtac SE80 Standard Cylinder SE80AX750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX750S
The AirTAC SE80AX750S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Delivering a robust 2513 N push force at 0.5 MPa, it handles substantial loads with precision. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without obstruction.
Configured for harsh environments, this unit features a SUS420J2 stainless steel rod (code A) for superior washdown and corrosion resistance. The integrated magnet (-S) enables seamless position detection with AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable air cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, preventing hard impacts during high-speed operations.
Airtac SE80 Standard Cylinder SE80AX750S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX750S Is Used
Palletizer Case Pusher
Pushes filled corrugated cartons onto exit conveyors in high-speed packaging lines, utilizing the 2513 N push force to overcome box friction and the 750 mm stroke to clear the pallet zone.
Metal Stamping Ejector
Ejects heavy stamped metal blanks from press dies, where the SUS420J2 stainless rod withstands residual cutting fluids and washdown cycles without degrading.
Logistics Diverter Arm
Actuates a diverter arm on a sorting conveyor, using the 750 mm stroke to reach across wide belt modules and redirect heavy totes into secondary chutes.
Is the Airtac SE80 Standard Cylinder SE80AX750S the Right Cylinder?
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore cylinder sits comfortably in the upper-mid range. If your application requires less force, stepping down to the 63 mm bore yields 1559 N of push. Conversely, upgrading to the 100 mm bore provides 3927 N for heavier demands. With its 750 mm stroke, long unsupported piston travel increases the risk of rod-bearing bending; utilizing an external guide rail is highly recommended to prevent premature wear.
This model is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders. Match the PT3/8 port, M20x1.5 rod thread, and your required mounting accessory. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod. If the machine loses air pressure, the load will drift, requiring a BSE rod lock for secure position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX750S FAQ
The SE80AX750S generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the field-adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a mechanical brake. If air is exhausted or a valve is centered, the rod will drift under load. For true position holding, consider the AirTAC BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.