Airtac SE80 Standard Cylinder SE80AX75S
The AirTAC Airtac SE80 Standard Cylinder SE80AX75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX75S
The AirTAC SE80AX75S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa and features a 75 mm stroke. Equipped with a SUS420J2 stainless steel rod, it is specifically designed to resist corrosion in washdown or chemically aggressive environments.
Unlike traditional tie-rod cylinders, this model uses an extruded aluminum barrel with integrated sensor grooves on three sides, allowing flexible mounting and easy sensor placement. The inclusion of a built-in magnet (-S) enables seamless position feedback with AirTAC CMSE reed or DMSE solid-state switches, while field-adjustable pneumatic cushioning at both ends softens end-of-stroke impacts.
Airtac SE80 Standard Cylinder SE80AX75S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX75S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX75S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX75S Is Used
CNC Lathe Door Automation
Utilizes the 2513 N push force to slide heavy machine tool doors, while the SUS420J2 stainless rod withstands cutting fluid splatter and high-moisture environments.
Palletizer Crate Pusher
Leverages the 75 mm stroke to index filled cardboard crates onto a wrapping station, relying on the adjustable end cushions to prevent harsh mechanical stops at high cycle rates.
Beverage Bottle Rinser
Employs the built-in S magnet with DMSE electronic sensors to verify gripper positioning during bottle cleaning, ensuring the stainless rod survives constant washdown exposure.
Is the Airtac SE80 Standard Cylinder SE80AX75S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your exact force requirements against its 2513 N push at 0.5 MPa. If your application demands less energy, stepping down to the 63 mm bore yields 1559 N of push force. Conversely, scaling up to the 100 mm bore provides 3927 N for heavier payloads. Remember that a standard SE cylinder does not hold a load if air pressure is lost; if your process requires mechanical position holding, consider the BSE rod-lock variant.
For retrofitting, this unit is dimensionally interchangeable per ISO 15552 standards. Ensure your setup matches the PT3/8 port, M20x1.5 rod thread, and 36 mm cushion length. The SUS420J2 stainless rod material is ideal for food processing or moisture-heavy environments where standard carbon steel would degrade.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX75S FAQ
At 0.5 MPa, the SE80AX75S provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX75S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint and interface dimensions as other standard profile cylinders. It features a PT3/8 port and an M20x1.5 rod thread for straightforward drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.