Airtac SE80 Standard Cylinder SE80AX800S
The AirTAC Airtac SE80 Standard Cylinder SE80AX800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke800 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX800S
The AirTAC SE80AX800S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and an 800 mm stroke. Equipped with a SUS420J2 stainless steel rod, it is purpose-built for corrosive or washdown environments where standard carbon steel would fail.
This model features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames. The integrated magnet (-S) enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors. Field-adjustable air cushioning at both ends allows technicians to tune the end-of-stroke deceleration, smoothly dampening the high kinetic energy generated by moving loads across the long 800 mm travel.
Airtac SE80 Standard Cylinder SE80AX800S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX800S Is Used
Pallet Transfer Diversion
Provides the 2513 N push force needed to divert heavy timber pallets across a packaging line, while the SUS420J2 rod withstands ambient moisture and wood dust.
Bottle Washdown Ejector
Utilizes its 800 mm stroke to push crates of beverage containers out of a washdown chamber, relying on the stainless steel rod for corrosion resistance against cleaning chemicals.
Automated Press Feed
Drives a heavy metal blank into a stamping press using its 3518 N thrust at 0.7 MPa, with the adjustable cushion absorbing the shock of the long 800 mm extension.
Is the Airtac SE80 Standard Cylinder SE80AX800S the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires substantial thrust; stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. Because this unit features an 800 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads—always incorporate an external linear guide to prevent rod-bearing damage and premature seal wear.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct drop-in replacement for other ISO 15552 cylinders, matching standard mounting hardware like FA front flanges or TC center trunnions. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If your process requires position holding upon air loss, pair this cylinder with a BSE rod lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX800S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE80AX800S is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders. It uses standard PT3/8 ports and an M20x1.5 rod thread, and the built-in magnet works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.