Airtac SE80 Standard Cylinder SE80AX80S
The AirTAC Airtac SE80 Standard Cylinder SE80AX80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX80S
The AirTAC SE80AX80S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. It features an 80 mm bore, generating 2513 N of push force and 2268 N of pull force at 0.5 MPa. Equipped with a SUS420J2 stainless steel rod (code A), it is purpose-built for corrosive environments and washdown duty where standard carbon steel would fail prematurely.
This unit includes a built-in magnet (code S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The square extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration, effectively softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80AX80S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX80S Is Used
Beverage Line Capper
Drives the capping heads on a beverage bottling line, where the 2513 N push force at 0.5 MPa securely seals caps and the SUS420J2 rod withstands daily washdowns.
Pallet Divert Gate
Actuates a heavy-duty routing gate on a 24V conveyor network, utilizing the 80 mm stroke and adjustable end-cushions to smoothly redirect filled pallets without shock.
Lab Mixer Lid Lift
Raises and lowers the safety lid on a chemical mixing vessel, relying on the corrosion-resistant stainless rod and DMSE electronic sensors to verify lid position.
Is the Airtac SE80 Standard Cylinder SE80AX80S the Right Cylinder?
If your application requires slightly less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, while moving up to the 100 mm bore provides a substantial 3927 N push. Keep in mind that a standard double-acting cylinder relies on continuous air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift. For critical load-holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve. To retrofit this into an existing setup, match the 80 mm bore, 80 mm stroke, PT3/8 port, and your required mounting accessory. The integrated -S magnet ensures you can easily drop in CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX80S FAQ
At 0.5 MPa, the SE80AX80S delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at the 1.0 MPa operating pressure limit.
Yes, the SE80AX80S is dimensionally interchangeable per ISO 15552 standards, serving as a drop-in replacement for other ISO 15552 profile cylinders. You can reuse existing mounting hardware and utilize the integrated magnet with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.