Airtac SE80 Standard Cylinder SE80AX95S
The AirTAC Airtac SE80 Standard Cylinder SE80AX95S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 95mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke95 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX95S
The AirTAC SE80AX95S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore, a 95 mm stroke, and a Ø25 mm rod with an M20x1.5 thread. Equipped with a SUS420J2 stainless steel rod (option A), this actuator is purpose-built for corrosive and washdown environments where a standard carbon steel rod would pit or degrade.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mounting profile that resists corrosion and simplifies sensor placement along its three integrated grooves. Because this unit includes the -S magnet, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. Furthermore, the field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration precisely, softening hard mechanical stops during high-speed cycling.
Airtac SE80 Standard Cylinder SE80AX95S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX95S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX95S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX95S Is Used
Palletizer Flap Control
Actuating heavy cardboard flap folders on a palletizer line, utilizing the 2513 N push force to overcome spring resistance while the SUS420J2 rod resists ambient washdown moisture.
CNC Lathe Chuck Unloader
Ejecting finished turned shafts from a CNC lathe, where the 95 mm stroke provides rapid extraction and the adjustable cushion protects the spindle bearing from impact at 800 mm/s.
Bottle Diverter Gate
Driving a diverter arm on a beverage conveyor to route glass bottles, relying on the built-in magnet and DMSE electronic sensors to confirm gate position for the safety PLC.
Is the Airtac SE80 Standard Cylinder SE80AX95S the Right Cylinder?
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore cylinder sits perfectly between the 63 mm class (1559 N push) and the 100 mm class (3927 N push). If your application requires less thrust or a smaller physical footprint, stepping down to the 63 mm bore is ideal; conversely, the 100 mm bore provides the next tier of power for heavier loads. Keep in mind that a standard SE cylinder cannot hold a load if air pressure is lost or the valve is centered—the piston will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. With a 95 mm stroke, side-load bending is minimal, but always ensure the rod-end thread M20x1.5 is properly aligned to avoid premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX95S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE80AX95S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and port sizes (PT3/8) as other standard profile cylinders. It is a drop-in replacement for any ISO 15552 cylinder, featuring a corrosion-resistant SUS420J2 rod and a built-in magnet for CMSE/DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.