Airtac SE80 Standard Cylinder SE80BX10H
The AirTAC Airtac SE80 Standard Cylinder SE80BX10H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX10H
The AirTAC SE80BX10H is a double-acting single-rod ISO 15552 profile cylinder engineered for severe environments. It delivers a robust 2513 N push force at 0.5 MPa and features a 10 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this configuration withstands corrosive washdowns and sustained operating temperatures up to 150 C. The extruded aluminum barrel omits external tie rods, yielding a flush, compact body that resists debris buildup and simplifies direct mounting.
Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting machinery from hard impacts during rapid 30-800 mm/s cycles. This unit ships without a built-in position-sensing magnet, focusing purely on high-force actuation. For applications demanding mid-stroke stopping or load holding without live air pressure, this cylinder relies on external valving or the dedicated BSE rod-lock variant, as the air cushion only decelerates and does not brake.
Airtac SE80 Standard Cylinder SE80BX10H Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX10H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX10H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX10H Is Used
Chemical Dispense Valve
Actuates a high-flow process valve with 2513 N of force, utilizing the SUS304 rod and FKM Viton seals to survive 150 C chemical washdowns.
Hot Stamping Press
Drives a 10 mm short-stroke clamping jaw in a metalforming press, where the FKM seal resists ambient radiant heat and the adjustable cushion softens rapid impacts.
Bottle Capper Head
Provides precise downward capping pressure in a high-speed bottling line, benefiting from the smooth tie-rod-free profile that prevents fluid pooling.
Is the Airtac SE80 Standard Cylinder SE80BX10H the Right Cylinder?
This 80 mm bore generates 2513 N of push force at 0.5 MPa. If your application requires less force, the 63 mm bore offers 1559 N; stepping up to the 100 mm bore yields 3927 N for heavier loads. Because this is a 10 mm stroke, side-loading stress on the rod bearing is minimal, but always ensure the load is axially aligned to prevent seal wear. The PT3/8 port and M20x1.5 rod thread match the standard ISO 15552 footprint, ensuring seamless hardware compatibility. Note that this specific SKU lacks a sensor magnet; if position feedback is required, select an -S option to use CMSE reed or DMSE electronic switches. Remember, a standard SE cylinder drifts when air is lost; use a BSE variant for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX10H FAQ
This 80 mm bore cylinder outputs 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. Thanks to the Viton (FKM) seals and SUS304 rod, it operates in temperatures ranging from -20 C up to 150 C.
Yes, it is dimensionally interchangeable per ISO 15552, allowing a drop-in replacement for other standard profile cylinders using existing mounting hardware. However, it does not hold a load if air pressure is lost; for fail-safe holding, use the BSE rod-lock variant. The field-adjustable air cushions only decelerate the piston near stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX10H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.