Airtac SE80 Standard Cylinder SE80BX150H
The AirTAC Airtac SE80 Standard Cylinder SE80BX150H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX150H
The AirTAC SE80BX150H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature and corrosive environments. It delivers a robust 2513 N push force at 0.5 MPa and features a 150 mm stroke. Unlike traditional tie-rod designs, its square extruded aluminum barrel omits external rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies fixture integration.
This specific configuration pairs a SUS304 stainless steel piston rod (code B) with a Viton FKM seal (code H), extending the operating temperature range up to 150 C for washdown or harsh chemical duty. The cylinder relies on field-adjustable pneumatic cushioning at both ends to decelerate the payload smoothly near stroke end. Note that this SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors without modification.
Airtac SE80 Standard Cylinder SE80BX150H Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX150H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX150H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX150H Is Used
Chemical Washdown Station
The SUS304 rod and Viton FKM seal survive caustic washdowns in food and pharma facilities, providing 2513 N of push force to actuate spray hood doors at 150 C.
Hot Stamping Press Ejection
With a 150 mm stroke and 3518 N push at 0.7 MPa, this cylinder ejects forged parts from heated platens where standard NBR seals would quickly degrade.
Automated Welding Clamps
The stainless rod resists weld spatter and grinding debris, while the 80 mm bore delivers the 513 kgf maximum clamping thrust needed to hold heavy steel frames during robotic welding.
Is the Airtac SE80 Standard Cylinder SE80BX150H the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore is a heavy-duty actuator. If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push, while moving up to the 100 mm bore provides a 3927 N push. Keep in mind that a standard double-acting cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift and cannot hold a load. For positive holding, consider the BSE rod-lock variant. To retrofit this into an existing setup, match the 80 mm bore, 150 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX150H FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with an absolute maximum push of 513 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, and the FKM seal supports temperatures up to 150 C.
Yes, the SE80BX150H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. Its mounting interface and physical dimensions allow it to serve as a drop-in replacement for other ISO 15552 profile cylinders. The barrel features sensor grooves on three sides, though this specific SKU lacks the -S magnet required for CMSE or DMSE sensor switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX150H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.