Airtac SE80 Standard Cylinder SE80BX150SN
The AirTAC Airtac SE80 Standard Cylinder SE80BX150SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX150SN
The AirTAC SE80BX150SN is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous motion control. Delivering 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, it handles heavy actuation with a 150 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from washdown environments.
This specific configuration features a SUS304 stainless steel rod (code B) paired with an NBR seal, making it highly resilient against moisture and chemical exposure. The integrated magnet (-S) enables seamless position sensing with AirTAC CMSE reed or DMSE electronic switches fitted into the three-sided sensor grooves. Furthermore, field-adjustable air cushions at both stroke ends allow technicians to tune end-of-stroke deceleration, softening hard mechanical stops during high-speed 30-800 mm/s operations.
Airtac SE80 Standard Cylinder SE80BX150SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX150SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX150SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX150SN Is Used
Palletizer Case Ejector
Ejects filled cardboard cases at 2513 N push force, relying on the SUS304 rod to resist humid washdown conditions in food packing lines.
Bottling Line Diverter
Diverts high-speed PET bottle traffic on a conveyor, using the integrated magnet and DMSE sensors to confirm reach across the 150 mm stroke.
Pharmaceutical Skid Actuator
Drives a 150 mm valve stroke on a process skid, benefiting from the NBR seal and adjustable pneumatic cushions to smooth high-speed 800 mm/s closures.
Is the Airtac SE80 Standard Cylinder SE80BX150SN the Right Cylinder?
Providing 2513 N push at 0.5 MPa, this 80 mm bore fits mid-to-heavy industrial tasks. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push. Conversely, upgrading to the 100 mm bore provides 3927 N push for heavier loads. Because the 150 mm stroke is below the 300 mm threshold, side-load bending stress on the Ø25 mm rod bearing is minimal, though external guides remain recommended for heavy off-center loads. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If air pressure drops, the cylinder drifts, requiring a BSE rod lock for secure position holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement sharing standard mounting footprints and PT3/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX150SN FAQ
At 0.5 MPa, the 80 mm bore generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, push increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards, serving as a drop-in retrofit for standard mounting hardware and PT3/8 ports. The built-in magnet (-S) works directly with AirTAC CMSE reed and DMSE electronic sensors housed in the barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX150SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.