Airtac SE80 Standard Cylinder SE80BX160S
The AirTAC Airtac SE80 Standard Cylinder SE80BX160S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX160S
The AirTAC SE80BX160S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a Ø25 mm rod with an M20x1.5 thread. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration features a SUS304 stainless steel rod (code B) for superior performance in corrosive or washdown environments. A built-in magnet (-S) enables seamless integration with AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune deceleration and soften hard end stops during high-speed operation.
Airtac SE80 Standard Cylinder SE80BX160S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX160S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX160S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX160S Is Used
Beverage Bottling Line Diverter
Leveraging the SUS304 stainless rod and 2513 N push force, this cylinder reliably diverts high-speed PET bottles on a washdown bottling line without succumbing to moisture corrosion.
CNC Lathe Chuck Actuator
The 160 mm stroke and 3518 N extend force at 0.7 MPa provide the robust, repeatable clamping motion required to actuate a heavy-duty CNC lathe chuck during automated bar feeding.
Injection Mold Ejector Plate
Utilizing the built-in magnet for DMSE electronic position feedback, this unit precisely sequences the ejection of molded plastic parts from a 200-ton injection molding machine.
Is the Airtac SE80 Standard Cylinder SE80BX160S the Right Cylinder?
When sizing this 80 mm bore cylinder, evaluate your force requirements carefully. If 2513 N push at 0.5 MPa is excessive, stepping down to the 63 mm bore yields 1559 N. If your load demands more power, the 100 mm bore provides 3927 N. Because this is a double-acting single-rod cylinder, it cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider an AirTAC BSE rod lock variant.
At a 160 mm stroke, the 36 mm cushion stroke effectively absorbs kinetic energy near the end of travel. For any application approaching or exceeding 300 mm of stroke, the bending moment on the rod bearing becomes critical; an external guide is strongly recommended to prevent side-load damage. This model's PT3/8 port and standardized ISO 15552 mounting interface ensure it functions as a drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessories seamlessly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX160S FAQ
The SE80BX160S provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80BX160S is dimensionally interchangeable per ISO 15552 standards. It features a PT3/8 port and standard mounting interfaces, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders using existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.