Airtac SE80 Standard Cylinder SE80BX180S
The AirTAC Airtac SE80 Standard Cylinder SE80BX180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX180S
The AirTAC SE80BX180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding washdown and corrosive environments. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and 180 mm stroke. Equipped with a SUS304 stainless steel rod (code B), it inherently resists rust and chemical exposure better than standard carbon steel.
This model features an extruded aluminum barrel without external tie rods, keeping the body compact and flush-mounted while resisting contamination. The integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable pneumatic cushioning at both ends allows you to dial in the exact deceleration needed to prevent hard end-stop impacts at operating speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80BX180S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX180S Is Used
Flow Wrapper Sealing
Drives the sealing jaw mechanism on continuous flow wrappers, utilizing the 2513 N push force to cleanly cut and seal packaging films at high cycle rates.
Pharmaceutical Washdown
Actuates process valves in pharmaceutical mixing tanks, relying on the SUS304 stainless rod to withstand harsh chemical clean-in-place (CIP) washdowns without corroding.
Injection Mold Ejection
Provides the 180 mm stroke and 2268 N pull force required to safely eject molded plastic components from deep cavity tools before the robot arm extracts them.
Is the Airtac SE80 Standard Cylinder SE80BX180S the Right Cylinder?
When sizing this 80 mm bore cylinder, evaluate your exact thrust requirements to step up or down effectively. If your application only requires 1559 N of push force at 0.5 MPa, stepping down to the 63 mm bore saves space and air consumption. Conversely, if you need 3927 N at 0.5 MPa, stepping up to the 100 mm bore provides the necessary margin. At 180 mm stroke, the 25 mm rod and M20x1.5 thread handle substantial side loads, but for heavy off-center loads, an external guide is still recommended to prevent rod-bearing wear. Because this is a standard ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the 80 mm bore, 180 mm stroke, PT3/8 port, and standard mounting accessories. Note that the adjustable cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX180S FAQ
The SE80BX180S provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, and it achieves a maximum push of 513 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
No, the SE80BX180S is a double-acting cylinder and the adjustable air cushion only decelerates the piston near the end of the stroke; it does not function as a brake or lock. If you need to hold a vertical load without live air pressure, you should use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.