Airtac SE80 Standard Cylinder SE80BX200H
The AirTAC Airtac SE80 Standard Cylinder SE80BX200H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX200H
The AirTAC SE80BX200H is a double-acting, single-rod ISO 15552 profile cylinder engineered for severe environments. It generates 2513 N of push force at 0.5 MPa and features a 200 mm stroke. This specific configuration pairs a SUS304 stainless steel piston rod with a Viton (FKM) seal, widening the operating temperature range from -20 to +150 C for washdown and high-heat applications. The standard PT3/8 port and 30-800 mm/s speed range remain intact.
Built on an extruded aluminum barrel without external tie rods, the square profile resists corrosion and allows flush mounting on tight machinery frames. Instead of a fixed rubber bumper, it uses field-adjustable air cushioning at both ends with a 36 mm stroke cushion length, letting technicians dial in end-of-stroke deceleration to prevent hard impacts at high velocities.
Airtac SE80 Standard Cylinder SE80BX200H Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX200H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX200H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX200H Is Used
Chemical Processing Valves
Actuates heavy process valves in caustic environments, utilizing the SUS304 rod and FKM Viton seals to withstand 150 C thermal cycling and chemical washdowns.
Hot Melt Packaging Press
Drives a 200 mm stamping stroke on a hot-melt adhesive line, where the 2513 N push force securely seats carton flaps near 120 C machinery zones.
Bakery Oven Conveyor Divert
Powers a diverting gate on a continuous baking line, relying on the no-tie-rod extruded profile and high-temp seals to survive radiant heat and flour dust.
Is the Airtac SE80 Standard Cylinder SE80BX200H the Right Cylinder?
At 0.5 MPa, this 80 mm bore outputs 2513 N of push force. If your machinery needs less force, the 63 mm bore provides 1559 N; if you require substantially more thrust, stepping up to the 100 mm bore yields 3927 N. Because this is a standard 200 mm stroke under the 1500 mm maximum, it ships as a common configuration. Note that a plain double-acting cylinder drifts when air is lost or a valve is centered; if your application must hold a vertical load without live pressure, integrate an external BSE rod lock.
For any stroke length of 300 mm or more on this 80 mm bore, the 25 mm rod and M20x1.5 thread experience increased bending moments under side loads. Always support long extensions with an external guide rail to prevent premature rod-bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX200H FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
Yes, it is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing mounting hardware. The Viton (FKM) seal expands the thermal limit to 150 C, and the SUS304 rod adds corrosion resistance, though it lacks a position sensor magnet on this SKU.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX200H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.