Airtac SE80 Standard Cylinder SE80BX200N
The AirTAC Airtac SE80 Standard Cylinder SE80BX200N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX200N
The AirTAC SE80BX200N is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa and a maximum output of 513 kgf at 1.0 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames while freeing up valuable surrounding space.
Configured with a SUS304 stainless steel rod and an NBR seal, this 80 mm bore unit is tailored for corrosive or washdown environments. The barrel integrates sensor grooves on three sides for flexible switch placement, though this specific SKU ships without a magnet. Field-adjustable air cushioning at both ends allows precise tuning of end-of-stroke deceleration to absorb kinetic energy smoothly.
Airtac SE80 Standard Cylinder SE80BX200N Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX200N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX200N
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX200N Is Used
Palletizer Case Pusher
Drives carton pusher arms on palletizing lines, utilizing the 200 mm stroke and 2513 N push to index heavy boxes onto wrapping stations reliably.
Food Washdown Diverter
Leverages the SUS304 rod and NBR seal to route fluid or product on food processing lines where rinse-down chemicals would degrade standard carbon rods.
CNC Fixture Clamp
Secures large cast iron automotive blanks inside CNC machining centers, applying up to 513 kgf of clamping force to prevent vibration during heavy milling.
Is the Airtac SE80 Standard Cylinder SE80BX200N the Right Cylinder?
Generating 2513 N of push at 0.5 MPa, this 80 mm bore cylinder sits perfectly between the 63 mm class (1559 N push) and the 100 mm class (3927 N push), giving you clear stepping options if your payload requirements shift. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if the air supply drops or the valve centers, the piston will drift. For load-holding without continuous pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX200N FAQ
The SE80BX200N generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It uses a PT3/8 port and a 25 mm rod with an M20x1.5 thread.
Yes, the SE80BX200N is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing ISO 15552 mounting hardware without altering your frame footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX200N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.