Airtac SE80 Standard Cylinder SE80BX200SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX200SH
The AirTAC SE80BX200SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for severe environments. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) across a 200 mm stroke, making it well-suited for heavy actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
Configured with a SUS304 stainless steel rod and high-temperature FKM seals, this unit operates reliably up to 150 C in washdown or chemically exposed settings. The integrated magnet supports CMSE and DMSE position sensing, while field-adjustable pneumatic cushioning at both ends lets you fine-tune end-of-stroke deceleration to absorb hard kinetic impacts.
Airtac SE80 Standard Cylinder SE80BX200SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX200SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX200SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX200SH Is Used
Palletizer Case Pusher
Drives heavy corrugated cardboard cases onto pallets at 2513 N push, utilizing the 200 mm stroke to clear the conveyor lane during retraction.
CIP Washdown Diverter
Actuates flow diversion valves in food-grade lines, relying on the SUS304 rod and FKM seals to withstand 150 C caustic wash cycles.
Press Ejection Arm
Kicks stamped metal parts out of a hydraulic press bed, using adjustable air cushions to soften the 3518 N impact at 0.7 MPa.
Is the Airtac SE80 Standard Cylinder SE80BX200SH the Right Cylinder?
If sizing up or down, the neighboring 100 mm bore offers 3927 N push at 0.5 MPa, while the 63 mm bore provides 1559 N. This 80 mm model strikes a strong middle ground for high-force needs. Note that a standard SE does not hold a load when air is exhausted; for fail-safe position holding, consider the BSE rod lock variant. For a drop-in ISO 15552 retrofit, match the 80 mm bore, 200 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX200SH FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80BX200SH is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 80 mm bore, 200 mm stroke, and PT3/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.