Airtac SE80 Standard Cylinder SE80X1000
The AirTAC Airtac SE80 Standard Cylinder SE80X1000 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1000
The AirTAC SE80X1000 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized mounting interfaces.
This specific SKU is configured without a position-sensing magnet, relying instead on its field-adjustable pneumatic cushioning at both ends to decelerate the 25mm piston rod smoothly over its 1000mm travel. The cushion screws can be tuned on-site to soften hard end stops, ensuring the actuator handles high kinetic energy without mechanical shock.
Airtac SE80 Standard Cylinder SE80X1000 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1000 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1000
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1000 Is Used
Pallet Transfer Diversion
Utilizes the 1000mm stroke to push heavy timber pallets cleanly off a high-speed main conveyor line onto a secondary packaging spur.
Injection Mold Ejection
Provides 2513 N of extend force to actuate a secondary ejector arm, reliably stripping large automotive interior panels from injection mold tooling.
Bulk Container Forming
Deploys the full meter of travel to erect and square large corrugated bulk bins, using the adjustable end cushions to prevent tearing the cardboard.
Is the Airtac SE80 Standard Cylinder SE80X1000 the Right Cylinder?
Selecting the SE80X1000 is appropriate when your application requires a 1000mm stroke and substantial thrust, stepping up from the 63mm bore which provides 1559 N push at 0.5 MPa. If your machinery demands even greater power, the 100mm bore offers 3927 N push at 0.5 MPa as the next logical upgrade. Because this unit lacks the -S magnet option, it cannot host CMSE or DMSE position sensors; if end-of-stroke confirmation is required, a non-contact external sensor or a different SKU with the built-in magnet must be specified.
At 1000mm of travel, the unsupported mass of the rod and attached load introduces significant bending moments on the rod bearing. An external guide rail should be integrated to prevent premature side-load wear. Furthermore, this standard SE cylinder will drift if air pressure is lost or the valve is centered; it cannot hold a vertical load safely without a pilot-operated check valve or a BSE rod lock variant. Dimensionally interchangeable per ISO 15552, it serves as a direct drop-in replacement for other ISO 15552 cylinders sharing the PT3/8 port and 80mm footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1000 FAQ
The SE80X1000 delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range for this 80mm bore is 30-800 mm/s.
Yes, the SE80X1000 is dimensionally interchangeable per ISO 15552, allowing it to serve as a drop-in replacement for other standard profile cylinders. It shares the standardized 80mm mounting interface and PT3/8 port, though note this specific SKU lacks the internal magnet for CMSE or DMSE position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.