Airtac SE80 Standard Cylinder SE80X100CBCR
The AirTAC Airtac SE80 Standard Cylinder SE80X100CBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100CBCR
The AirTAC SE80X100CBCR is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks. It generates 2513 N of push force at 0.5 MPa and features a robust 25 mm piston rod with an M20x1.5 thread. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This 80 mm bore unit includes a CB double clevis mounting accessory for pivoting articulation. It relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, softening hard impacts at high cycle rates. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X100CBCR Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100CBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100CBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100CBCR Is Used
Palletizer Case Pusher
Drives a 100 mm stroke to push heavy corrugated cardboard cases onto palletizing lanes, utilizing the 2513 N push force to overcome carton sliding friction.
Injection Mold Extraction
Articulates via the CB clevis to extract molded plastic bins from a press, relying on the 2268 N pull force to detach parts from deep cavities.
Metal Stamping Ejector
Kicks heavy stamped steel brackets out of a progressive die fixture, using the adjustable pneumatic cushions to soften end-of-stroke impacts during rapid cycling.
Is the Airtac SE80 Standard Cylinder SE80X100CBCR the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application demands 2513 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push, while moving up to the 100 mm bore provides 3927 N for heavier payloads. The CB double clevis mount is ideal for pivoting mechanisms where the load path changes angle through the stroke. Remember that the adjustable end cushions only decelerate the piston near the stroke limits; they do not hold a load. If air pressure drops or the valve centers, the rod will drift. For secure position holding, consider the BSE rod-lock variant or an external pilot-operated check valve. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, sharing standardized mounting footprints and hardware for seamless retrofits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100CBCR FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, and it achieves a maximum push of 513 kgf at 1.0 MPa.
No, the adjustable air cushions at both ends only decelerate the piston near the stroke end and do not act as a brake. If air is exhausted or the valve is centered, the rod will drift. For position holding, use a BSE rod lock variant or an external locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100CBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.