Airtac SE80 Standard Cylinder SE80X100SH
The AirTAC Airtac SE80 Standard Cylinder SE80X100SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100SH
The AirTAC SE80X100SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature and heavy-duty operations. It delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull, making it well-suited for demanding industrial cycles. Equipped with an FKM (Viton) seal, this unit reliably operates in environments reaching up to 150 C.
Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. The integrated -S magnet enables precise end-of-stroke detection with CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration for fast-moving 80 mm bore loads.
Airtac SE80 Standard Cylinder SE80X100SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100SH Is Used
Injection Mold Extraction
With 2513 N of push force and a 100 mm stroke, this cylinder reliably ejects hot plastic parts from mold cavities, leveraging its FKM Viton seals to withstand ambient radiant heat up to 150 C.
Hot Metal Diverting
Ideal for diverting freshly stamped or welded metal components on a conveyor line, where the 80 mm bore provides sufficient thrust and the high-temp seal resists thermal degradation.
Engineered Press Clamping
Delivers robust 2268 N pulling force to secure workpieces during light machining or assembly presses, while the -S magnet confirms clamp engagement to the PLC via DMSE sensors.
Is the Airtac SE80 Standard Cylinder SE80X100SH the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force requirements carefully. If 2513 N of push at 0.5 MPa is excessive for your payload, stepping down to the 63 mm bore yields a more economical 1559 N push. Conversely, if your mechanism requires greater thrust, the 100 mm bore provides 3927 N at the same pressure. This SE80X100SH variant utilizes a PT3/8 port and a 25 mm rod thread (M20x1.5) to handle substantial side loads.
Because this model includes the -S magnet and H high-temperature seal, it is fully primed for position sensing in hot environments using AirTAC CMSE or DMSE switches. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift. For load-holding without continuous pressure, consider the BSE rod-lock variant. Additionally, for any stroke length of 300 mm or more, always incorporate an external guide to prevent rod-bearing bending under heavy side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, and it reaches a maximum of 513 kgf at 1.0 MPa. The standard operating speed ranges from 30-800 mm/s.
Yes, the SE80X100SH is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing footprints and mounting hardware. Its distinguishing feature is the FKM (Viton) seal, which extends the operating temperature range to 150 C, making it superior to standard TPU seals in high-heat applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.