Airtac SE80 Standard Cylinder SE80X105
The AirTAC Airtac SE80 Standard Cylinder SE80X105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 105mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke105 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X105
The AirTAC SE80X105 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing zero protruding hardware.
This 80 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread and a PT3/8 port for high flow. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles. This SKU ships without a magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE80 Standard Cylinder SE80X105 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X105 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X105
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X105 Is Used
Injection Mold Platens
Drives the opening and closing strokes of mid-sized injection mold platens, utilizing the 2513 N push force to separate heavy tooling halves reliably.
Pallet Diverters
Actuates heavy-duty pallet diverter arms on high-throughput packaging lines, where the 105 mm stroke provides precise routing of loaded pallets.
CNC Lathe Bar Feeders
Pushes raw bar stock through CNC lathe spindles, using the adjustable end cushions to prevent mechanical shock when the 80 mm bore reaches the feed limit.
Is the Airtac SE80 Standard Cylinder SE80X105 the Right Cylinder?
When sizing this 105 mm stroke model, compare its 2513 N push at 0.5 MPa against the smaller 63 mm bore (1559 N) or the larger 100 mm bore (3927 N) to ensure you match your load. As a standard double-acting cylinder, the SE80X105 will drift if air pressure is lost or a valve centers; if your application requires static position holding, integrate an external pilot-operated check valve or step up to the AirTAC BSE rod-lock variant. For ISO 15552 retrofits, verify the 105 mm stroke, PT3/8 port, and mounting accessory footprint to guarantee a drop-in replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X105 FAQ
The SE80X105 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, and the maximum push force is 513 kgf at 1.0 MPa. This 80 mm bore cylinder uses a PT3/8 port.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders for drop-in retrofits. However, as a standard double-acting cylinder, it does not hold its position if air is lost; the piston will drift. For load-holding, consider the AirTAC BSE series with a rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.