Airtac SE80 Standard Cylinder SE80X108S
The AirTAC Airtac SE80 Standard Cylinder SE80X108S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 108mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke108 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X108S
The AirTAC SE80X108S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It provides a substantial 2513 N push force at 0.5 MPa alongside a 2268 N pull force, utilizing a 25 mm piston rod. The 108 mm stroke is a non-standard dimension, offering a tailored motion length for specialized machine spacing requirements rather than a generic 100 mm or 125 mm jump.
Built with an extruded aluminum barrel that eliminates external tie rods, this unit mounts flush against frames to resist corrosion and save valuable machine space. The included -S magnet enables direct integration with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable air cushioning at both ends allows technicians to dial in end-stop deceleration via a screw, softening impacts at high cycle speeds.
Airtac SE80 Standard Cylinder SE80X108S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X108S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 108 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X108S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×108 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X108S Is Used
Injection Mold Ejection
Delivering 2513 N of push force at 0.5 MPa, this cylinder reliably ejects dense plastic injection molds, utilizing the 108 mm stroke to clear the press bed safely.
Pallet Diverting
The 2513 N thrust is ideal for diverting heavy loaded pallets on a conveyor line, while the -S magnet triggers DMSE sensors to confirm divert stroke completion.
Carton Folding Arms
Provides the necessary 2268 N pull force to retract heavy carton folding arms, with adjustable cushioning softening the rapid deceleration of high-speed packaging cycles.
Is the Airtac SE80 Standard Cylinder SE80X108S the Right Cylinder?
If your application requires slightly less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, whereas moving up to the 100 mm bore provides a robust 3927 N push for heavier loads. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain its position; if the air supply drops or the valve centers, the piston will drift, requiring an external pilot-operated check valve or a BSE rod lock for secure load holding. As a dimensionally interchangeable ISO 15552 component, it serves as a drop-in replacement for matching 80 mm bore, 108 mm stroke, PT3/8 port, and standard mounting hardware configurations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X108S FAQ
This 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, and it reaches a maximum push capacity of 513 kgf at 1.0 MPa.
Yes, the SE80X108S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, PT3/8 port size, and 25 mm rod thread as other compliant cylinders for direct retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X108S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.