Airtac SE80 Standard Cylinder SE80X1100S
The AirTAC Airtac SE80 Standard Cylinder SE80X1100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1100S
The AirTAC SE80X1100S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It provides a substantial 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 1100 mm stroke. Because this stroke exceeds the standard 1500 mm maximum for this bore, it is manufactured as a made-to-order unit to precisely fit your extended travel requirements.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes. Equipped with a built-in magnet, the cylinder directly supports AirTAC CMSE reed and DMSE electronic position sensing for precise end-of-stroke verification. Field-adjustable air cushions at both ends allow you to tune end-stop deceleration, protecting the mechanism during high-speed operations.
Airtac SE80 Standard Cylinder SE80X1100S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1100S Is Used
Pallet Transfer Line
Drives the extended pusher arm on a pallet conveyor, utilizing the 1100 mm stroke to index large pallets and the 2513 N force to overcome sliding friction.
Film Roll Web Feed
Actuates the traversing carriage on a heavy-duty packaging film web feed, relying on the built-in magnet for DMSE electronic end-of-travel detection.
CNC Lathe Bar Feeder
Pushes long bar stock through the lathe spindle, taking advantage of the 1100 mm made-to-order stroke and field-adjustable air cushions to soften impacts.
Is the Airtac SE80 Standard Cylinder SE80X1100S the Right Cylinder?
This 80 mm bore provides 2513 N push at 0.5 MPa. If your application requires less force, the 63 mm bore offers 1559 N; if you need significantly more thrust, the 100 mm bore delivers 3927 N. As a standard double-acting cylinder, the SE80X1100S does not hold its load when air pressure is lost or the valve is centered—the piston will drift. For position holding without live pressure, consider the BSE rod lock variant or an external pilot-operated check valve.
With a 1100 mm stroke, the 25 mm rod and internal bearing face a substantial bending moment under heavy side loads. To prevent premature seal wear and guide failure, you must support the load using an external linear guide rather than relying on the cylinder rod alone. The PT3/8 port and ISO 15552 mounting interface ensure seamless interchangeability with other standard profile cylinders, making this a true drop-in retrofit for existing fixtures.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1100S FAQ
At 0.5 MPa, the 80 mm bore generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a mechanical brake. If the air supply is lost or the valve is centered, the cylinder will drift. For fail-safe load holding, use the BSE rod lock variant or an external locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.