Airtac SE80 Standard Cylinder SE80X1100SN
The AirTAC Airtac SE80 Standard Cylinder SE80X1100SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1100SN
The AirTAC SE80X1100SN is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This 80 mm bore unit includes a built-in magnet for CMSE and DMSE position sensing, plus NBR seals for reliable operation. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting long-stroke assemblies from impact shock.
Airtac SE80 Standard Cylinder SE80X1100SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1100SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1100SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1100SN Is Used
Plastic Injection Mold Ejector
Provides 2513 N of push force at 0.5 MPa to drive long-stroke ejector pins on large injection molding machines, ensuring finished parts clear the mold safely.
Press Brake Crowning
Adjusts the crowning system on heavy press brakes, using the 1100 mm stroke to maintain precise angle uniformity across long sheet metal bends.
Automated Stacker Arm
Actuates a pivoting stacker arm in outbound packaging lines, utilizing the built-in magnet for DMSE end-of-stroke confirmation before layering products.
Is the Airtac SE80 Standard Cylinder SE80X1100SN the Right Cylinder?
This 80 mm bore generates 2513 N push at 0.5 MPa. If your application requires less force, the 63 mm bore offers 1559 N; if you need substantially more thrust, the 100 mm bore provides 3927 N. Because the 1100 mm stroke is highly extended, the unsupported piston rod is susceptible to bending under lateral loads—always use an external guide to prevent rod-bearing damage. Note that this cylinder cannot hold a load if air pressure drops; integrate a BSE rod lock for fail-safe positioning. It serves as a drop-in ISO 15552 replacement matching 80 mm bore, 1100 mm stroke, PT3/8 port, and -S magnet specs.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1100SN FAQ
At 0.5 MPa, the SE80X1100SN delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X1100SN is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders with an 80 mm bore, matching mounting hardware and PT3/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1100SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.