Airtac SE80 Standard Cylinder SE80X110S
The AirTAC Airtac SE80 Standard Cylinder SE80X110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X110S
The AirTAC SE80X110S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Driven by a 25 mm piston rod, it provides the thrust required for heavy-duty positioning while maintaining a standardized footprint for straightforward machinery integration.
Because this configuration includes the -S magnet code, it is fully primed for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel omits external tie rods, yielding a cleaner profile that resists debris accumulation and simplifies flush mounting.
Airtac SE80 Standard Cylinder SE80X110S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X110S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X110S Is Used
Press Brake Tooling
Provides the 2513 N push force necessary to actuate heavy lower dies and back-gauge assemblies in metal fabrication press brakes.
Pallet Dispenser Gates
Utilizes the 110 mm stroke to kick and separate empty wooden pallets in automated high-speed palletizing lines.
Heavy Crate Diverter
Swings a mechanical deflector arm on a sorting conveyor to push loaded crates over 50 kg onto a secondary packaging spur.
Is the Airtac SE80 Standard Cylinder SE80X110S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your thrust requirements against its neighbors: the 63 mm bore yields 1559 N of push at 0.5 MPa, while the 100 mm bore steps up to 3927 N. This SE80X110S sits comfortably in the middle for medium-to-heavy loads. As a standard ISO 15552 cylinder, it serves as a drop-in replacement for any matching 80 mm bore and 110 mm stroke profile cylinder, utilizing standard PT3/8 ports and shared mounting accessories.
Note that the field-adjustable air cushion at both ends only decelerates the piston near the stroke endpoints to soften impacts; it is not a locking mechanism. If your application must hold a vertical load without live air pressure, you must integrate an external rod lock like the AirTAC BSE series or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X110S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes. The SE80X110S is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing 80 mm bore mounting hardware. The integrated -S magnet also allows you to mount AirTAC CMSE or DMSE sensors directly into the barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.