Airtac SE80 Standard Cylinder SE80X1150S
The AirTAC Airtac SE80 Standard Cylinder SE80X1150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1150S
The AirTAC SE80X1150S is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-stroke actuation. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 1150 mm stroke to bridge substantial machinery gaps. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts even when moving heavy loads at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X1150S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1150S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1150S Is Used
Pallet Transfer Pusher
Uses the 2513 N push force to index heavy loaded pallets between roller conveyor sections over the 1150 mm stroke distance.
Automated Welding Hood
Deploys a large pneumatic welding shield over a robotic cell, relying on the DMSE electronic sensors to confirm safe deployment.
Large Carton Erector
Actuates the main folding arm on a heavy-duty corrugated box erector, using the adjustable cushion to prevent slamming at full extension.
Is the Airtac SE80 Standard Cylinder SE80X1150S the Right Cylinder?
Selecting this 80 mm bore makes sense when 50 mm (982 N push @0.5 MPa) lacks power, but stepping up to 100 mm (3927 N push @0.5 MPa) would be physical overkill. Because the 1150 mm stroke exceeds the standard 1500 mm maximum catalog listing for this bore, it is supplied as a made-to-order non-standard stroke. At 1150 mm, the unsupported piston rod faces significant bending moments; always pair this cylinder with an external guide to prevent side-load damage to the rod bearing.
As a true ISO 15552 profile cylinder, it offers drop-in dimensional interchangeability with other ISO 15552 cylinders, simplifying retrofits. It uses a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread. Note that the adjustable cushion only decelerates the piston near stroke end—it is not a lock. If the application must hold a vertical load without live air pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1150S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE80X1150S features a standard ISO 15552 / VDMA 24562 profile body, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses a PT3/8 port and includes a built-in magnet for CMSE and DMSE position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.