Airtac SE80 Standard Cylinder SE80X115S
The AirTAC Airtac SE80 Standard Cylinder SE80X115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 115mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke115 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X115S
The AirTAC SE80X115S is a double-acting, single-rod ISO 15552 profile cylinder delivering a substantial 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, softening impacts during high-speed 30-800 mm/s operations.
Airtac SE80 Standard Cylinder SE80X115S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X115S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X115S Is Used
Press Brake Tooling
Provides the 2513 N push force required to actuate lower press brake dies during heavy-gauge sheet metal bending operations.
Pallet Diverters
Extends 115 mm to push heavy pallets onto secondary packaging lines, using the magnetic piston for DMSE sensor confirmation.
Injection Mold Extraction
Drives robust mechanical ejector arms to free molded plastic parts from tooling cavities prior to robotic removal.
Is the Airtac SE80 Standard Cylinder SE80X115S the Right Cylinder?
Generating 2513 N at 0.5 MPa, this 80 mm bore is a heavy-duty workhorse. If your application requires less force, the 63 mm bore offers 1559 N push; if you need more clamping power, the 100 mm bore provides 3927 N. Because the 115 mm stroke is under 300 mm, side-load stress on the M20x1.5 rod bearing is minimal, though unsupported loads still require external guiding.
This SE model is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 cylinders. Match your mounting accessory (LB, FA, TC) and port style (PT3/8) during retrofit. Note that a standard SE does not hold position if air pressure is lost; for static holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X115S FAQ
At 0.5 MPa, the SE80X115S generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at 30-800 mm/s with a PT3/8 port.
Yes, the SE80X115S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and port spacing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X115S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.