Airtac SE80 Standard Cylinder SE80X116S
The AirTAC Airtac SE80 Standard Cylinder SE80X116S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 116mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke116 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X116S
The AirTAC SE80X116S is a double-acting, single-rod profile cylinder built to the ISO 15552 standard. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, making it a robust choice for demanding mid-to-heavy pneumatic tasks. The 116 mm stroke is driven by a 25 mm hard-chrome plated rod.
Unlike traditional tie-rod designs, this unit utilizes a square extruded aluminum barrel that is completely flush and free of external protruding rods. This clean profile not only resists corrosion but allows for direct flush mounting. The integrated -S magnet enables position detection via CMSE reed or DMSE electronic sensors, while the field-adjustable air cushioning at both ends lets you fine-tune end-of-stroke deceleration to prevent hard impacts.
Airtac SE80 Standard Cylinder SE80X116S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X116S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 116 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X116S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×116 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X116S Is Used
CNC Fixture Clamping
Provides 2513 N of push force at 0.5 MPa to securely clamp heavy steel castings inside CNC machining centers, utilizing the adjustable cushion to soften the grip at stroke end.
Pallet Dispenser Pusher
Uses the 116 mm stroke and 3518 N push at 0.7 MPa to positively index and separate empty wooden pallets in high-speed automated packaging lines.
Injection Mold Ejection
Employs the built-in -S magnet and DMSE electronic sensors to confirm ejection stroke completion on plastic injection molding machines before the clamp opens.
Is the Airtac SE80 Standard Cylinder SE80X116S the Right Cylinder?
With a push force of 2513 N at 0.5 MPa, this 80 mm bore cylinder is sized for substantial loads. If your application requires less force, stepping down to the 63 mm bore drops the push output to 1559 N. Conversely, if you need to move heavier payloads, stepping up to the 100 mm bore increases the push force to 3927 N. Because the 116 mm stroke is under 300 mm, side-load stress on the rod bearing is minimal, though an external guide is still recommended for heavy lateral loads.
This SE80X116S is dimensionally interchangeable per ISO 15552, meaning it serves as a direct drop-in replacement for other ISO 15552 profile cylinders without altering your mounting footprint. It features a PT3/8 port and a standard M20x1.5 rod-end thread. Remember that a standard SE cylinder does not hold its position when air is lost; if your machine requires failsafe load holding, you must pair it with an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X116S FAQ
The 80 mm bore provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The pneumatic port size is PT3/8.
Yes, the SE80X116S is dimensionally interchangeable per ISO 15552 mounting dimensions. You can drop it directly into existing hardware designed for standard ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X116S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.