Airtac SE80 Standard Cylinder SE80X1200S
The AirTAC Airtac SE80 Standard Cylinder SE80X1200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1200S
The AirTAC SE80X1200S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. Operating at 0.5 MPa, it provides 2513 N of push force and 2268 N of pull force, scaling to 3518 N at 0.7 MPa. Its extruded aluminum barrel features a square profile without external tie rods, offering a flush mounting surface that resists corrosion and simplifies bracket installation in tight machine cells.
This 80 mm bore unit includes a built-in magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic switches. The integrated sensor grooves on three sides allow flexible mounting, while the field-adjustable pneumatic cushioning at both ends lets technicians dial in end-of-stroke deceleration to prevent hard impacts during high-speed 1200 mm traverses.
Airtac SE80 Standard Cylinder SE80X1200S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1200S Is Used
Palletizer Case Pusher
Drives large corrugated cases onto pallets using 2513 N push at 0.5 MPa, while the 1200 mm stroke accommodates wide multi-row product infeeds.
Automated Stamping Feeder
Feeds heavy steel blanks into a mechanical press, utilizing the 80 mm bore's 3518 N push at 0.7 MPa to overcome conveyor drag and part weight.
Long-Stroke Press Deflashing
Separates injection-molded automotive trim from flash over a 1200 mm travel, relying on adjustable end cushions to stop the heavy 25 mm rod smoothly.
Is the Airtac SE80 Standard Cylinder SE80X1200S the Right Cylinder?
If 2513 N of push at 0.5 MPa is too much force, step down to the 63 mm bore which yields 1559 N. For heavier pressing or lifting, step up to the 100 mm bore which provides 3927 N. Because this is a 1200 mm stroke, the 25 mm rod and thread face significant side-load and bending moments; an external guide rail is strongly recommended to prevent rod-bearing wear and premature seal failure.
For retrofits, this SE80X1200S is dimensionally interchangeable per ISO 15552, matching the 80 mm bore, 1200 mm stroke, PT3/8 port, and standard mounting accessories. Note that this cylinder relies on live air pressure to move and hold; if air is lost or the valve centers, the piston will drift. For position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1200S FAQ
The SE80X1200S delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The 1200 mm stroke is a standard catalog length for the 80 mm bore, which supports up to 1500 mm.
Yes, the SE80X1200S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, PT3/8 port size, and 25 mm rod thread dimensions for a drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.