Airtac SE80 Standard Cylinder SE80X1300SH
The AirTAC Airtac SE80 Standard Cylinder SE80X1300SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1300SH
The AirTAC SE80X1300SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding high-temperature and extended-stroke tasks. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) and features a 1300 mm stroke, classifying it as a made-to-order unit that exceeds the standard 1500 mm maximum. The FKM Viton seal expands the operating temperature range up to 150 C, making it suitable for harsh thermal environments.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. The integrated -S magnet enables direct positioning feedback via AirTAC CMSE reed or DMSE electronic sensors fitted into the triple-sided sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening hard impacts during high-speed operation.
Airtac SE80 Standard Cylinder SE80X1300SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1300SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1300SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1300SH Is Used
Thermoforming Press Ejection
Utilizes the 2513 N push force and 1300 mm stroke to eject deep-drawn plastic trays from heated molds, leveraging the FKM seal to withstand ambient 150 C radiant heat.
Automotive Paint Dryer Transfer
Moves heavy skids through high-temperature curing ovens where the Viton seal survives thermal exposure, while the built-in magnet triggers DMSE sensors for indexing.
Aluminum Extrusion Handling
Deploys the extended 1300 mm stroke to push long aluminum profiles onto cooling racks, relying on the rigid no-tie-rod profile to resist deflection during lateral transfer.
Is the Airtac SE80 Standard Cylinder SE80X1300SH the Right Cylinder?
This 80 mm bore generates 2513 N of push force at 0.5 MPa. If your application requires less energy, the adjacent 63 mm bore provides 1559 N; conversely, scaling up to the 100 mm bore yields 3927 N for heavier loads. Because the 1300 mm stroke exceeds the standard 1500 mm maximum, it is manufactured as a non-standard made-to-order configuration.
With a PT3/8 port, Ø25 mm rod, and M20x1.5 rod-end thread, this cylinder carries significant side-load capacity, but an unsupported 1300 mm stroke mandates an external guide to prevent rod-bearing bending. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a lock. If the machine loses air pressure, the piston will drift. For fail-safe load holding, pair this cylinder with a BSE rod lock or an external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders without requiring custom mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1300SH FAQ
The SE80X1300SH provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push of 513 kgf at 1.0 MPa. Equipped with an FKM Viton seal, it operates in environments up to 150 C.
Yes, the SE80X1300SH is dimensionally interchangeable per ISO 15552 standards. It features a standard PT3/8 port, M20x1.5 rod thread, and an extruded aluminum profile barrel without external tie rods, allowing it to drop into existing ISO 15552 mounting setups seamlessly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1300SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.