Airtac SE80 Standard Cylinder SE80X130S
The AirTAC Airtac SE80 Standard Cylinder SE80X130S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X130S
The AirTAC SE80X130S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It delivers a substantial 2513 N push force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 80mm bore unit includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration, softening hard impacts when moving heavy loads at speed.
Airtac SE80 Standard Cylinder SE80X130S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X130S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X130S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X130S Is Used
Palletizer Case Pusher
Leveraging the 2513 N push force and 130mm stroke to positively index heavy corrugated cases onto a palletizer bed without bounce.
Injection Mold Ejection
Using the 80mm bore to drive a heavy mold ejection plate, relying on the adjustable cushion to safely arrest the 25mm rod at high speeds.
Press Brake Tooling
Actuating a heavy lower die assembly on a press brake, where the extruded profile barrel mounts flush to the machine sub-plate.
Is the Airtac SE80 Standard Cylinder SE80X130S the Right Cylinder?
Stepping down to the 63mm bore drops the 0.5 MPa push force to 1559 N, while moving up to the 100mm bore increases it to 3927 N, letting you scale precisely to your load. Because this is a double-acting cylinder, it cannot hold a load if air pressure is lost; if your application requires static position holding, consider the BSE rod-lock variant. As a true ISO 15552 cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing standard mounting hardware and the PT3/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X130S FAQ
At 0.5 MPa, the SE80X130S provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes. The SE80X130S is dimensionally interchangeable per ISO 15552 standards, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders. It uses the same standardized mounting interface and PT3/8 port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.