Airtac SE80 Standard Cylinder SE80X1350
The AirTAC Airtac SE80 Standard Cylinder SE80X1350 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1350 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1350
The AirTAC SE80X1350 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding linear motion. It leverages a robust Ø25 mm piston rod and a PT3/8 port to generate 2513 N of push force at 0.5 MPa, extending across a 1350 mm stroke. Because this stroke exceeds the 1500 mm standard maximum threshold, it is manufactured as a non-standard made-to-order unit.
This actuator features an extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush in tight machine cavities. Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts at high transit speeds. Note that this specific SKU lacks a built-in magnet, meaning it cannot host CMSE or DMSE position sensors without modification.
Airtac SE80 Standard Cylinder SE80X1350 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1350 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1350
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1350 Is Used
Pallet Transfer Line Indexer
Uses the 2513 N thrust to push heavy pallets along a 1350 mm stroke between machining stations, relying on external guides to support the long traverse.
Automotive Press Material Feed
Deploys the extended 1350 mm reach to push sheet metal blanks into a hydraulic press, utilizing the adjustable cushion to soften the 80 mm bore impact.
High-Bay Storage Extractor
Extracts heavy totes from multi-level automated storage racks, taking advantage of the 513 kgf max capacity and the no-tie-rod profile to fit narrow aisles.
Is the Airtac SE80 Standard Cylinder SE80X1350 the Right Cylinder?
At 0.5 MPa, this 80 mm bore provides 2513 N of thrust, sitting between the 63 mm bore (1559 N) and the 100 mm bore (3927 N). If your payload demands less force, stepping down to the 63 mm bore saves space, while moving up to the 100 mm bore accommodates heavier loads. Because the 1350 mm stroke is non-standard, expect a longer lead time. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing identical mounting interface dimensions without claiming brand equivalence.
Driving a 1350 mm unsupported stroke imposes significant bending moments on the rod bearing. To prevent premature seal wear and guide failure, you must support the load with an external linear guide rather than relying on the cylinder itself to absorb side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1350 FAQ
At 0.5 MPa, the 80 mm bore generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
No. The adjustable air cushions at both ends only decelerate the piston near the stroke limits and act as a brake. If air is exhausted or the valve is centered, the piston will drift. For position holding, use a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.