Airtac SE80 Standard Cylinder SE80X1350S
The AirTAC Airtac SE80 Standard Cylinder SE80X1350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1350 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1350S
The AirTAC SE80X1350S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 1350 mm stroke to execute heavy-duty linear motion. Equipped with a built-in magnet, it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke position detection.
This unit features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames. The field-adjustable air cushioning at both ends is a true deceleration system, allowing technicians to dial in the damping via a screw to soften hard end stops at high cycling speeds, rather than relying on a fixed rubber bumper.
Airtac SE80 Standard Cylinder SE80X1350S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1350S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1350S Is Used
Pallet Transfer Line Diverter
Leverages the 2513 N push force and 1350 mm stroke to divert heavy pallets between adjacent conveyor belts in high-throughput distribution hubs.
CNC Lathe Bar Feeder
Utilizes the 1350 mm extension to push raw bar stock through a spindle, relying on the adjustable pneumatic cushion to prevent impact damage at the feed end.
Automotive Welding Robot Gate
Actuates a large safety enclosure door on a robotic welding cell, using the built-in magnet and DMSE sensors to confirm door closure before welding begins.
Is the Airtac SE80 Standard Cylinder SE80X1350S the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N, while moving up to the 100 mm bore provides 3927 N. Because this is a non-standard 1350 mm stroke, it is manufactured as a made-to-order component. To ensure accurate feedback, the built-in magnet (-S) supports CMSE and DMSE sensors. For retrofitting, it is dimensionally interchangeable per ISO 15552 standards.
At 1350 mm, the unsupported stroke length is substantial; the Ø25 mm rod and M20x1.5 thread can carry significant side loads, but an external guide is strongly recommended to prevent rod-bearing bending and premature seal wear. Remember that a plain SE cylinder does not hold its position or load when air is lost, exhausted, or the valve is centered—the piston will drift. If the application must hold a load without live pressure, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1350S FAQ
The SE80X1350S generates a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X1350S is dimensionally interchangeable per ISO 15552 mounting interface standards. It shares the standardized footprint and mounting hardware of other ISO 15552 cylinders, allowing for a drop-in retrofit. It uses a PT3/8 port and an M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.