Airtac SE80 Standard Cylinder SE80X1400
The AirTAC Airtac SE80 Standard Cylinder SE80X1400 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1400 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1400
The AirTAC SE80X1400 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, featuring a 1400 mm stroke that is custom-made to order. It delivers a robust 2513 N push force at 0.5 MPa, utilizing a 25 mm piston rod and PT3/8 ports. Because this stroke exceeds the 1500 mm standard maximum, it is engineered specifically for long-reach applications requiring significant extension.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when moving heavy loads at speed. Note that this specific SKU lacks the -S magnet option, meaning it is not equipped for direct CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X1400 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1400 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1400
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1400 Is Used
Pallet Transfer Pusher
Uses the 1400 mm reach to index heavy loaded pallets between roller conveyor sections, relying on 2513 N of thrust to overcome rolling resistance.
Automated Stacking Arm
Extends fully to push layered sheet materials onto a high-stacking discharge carriage, absorbing kinetic energy via the adjustable end cushions.
Long-Stroke Metal Forming
Drives a press dummy block to eject elongated extruded profiles from a draw bench, requiring the 80 mm bore's 3518 N push at 0.7 MPa.
Is the Airtac SE80 Standard Cylinder SE80X1400 the Right Cylinder?
Choosing this 80 mm bore makes sense when substantial thrust is required over a long distance; it provides 2513 N push at 0.5 MPa. If you need slightly less force, stepping down to the 63 mm bore yields 1559 N push, while stepping up to the 100 mm bore provides 3927 N push. Because the 1400 mm stroke is non-standard, expect a made-to-order lead time.
For an extension of 1400 mm, the 25 mm rod and internal bearing face significant bending moments under side loads; an external guide rail is strongly recommended to prevent premature seal wear. As a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered—it cannot hold a load vertically without a pilot-operated check valve or a BSE rod lock variant. It is dimensionally interchangeable with other ISO 15552 cylinders, accepting standard FA, FB, or TC mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1400 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum rated push force is 513 kgf at 1.0 MPa.
This specific SKU does not include the -S magnet, so it cannot trigger AirTAC DMSE electronic or CMSE reed sensors out of the box. You would need a cylinder configured with the -S magnet option for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.