Airtac SE80 Standard Cylinder SE80X1500
The AirTAC Airtac SE80 Standard Cylinder SE80X1500 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1500
The AirTAC SE80X1500 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding industrial tasks. It delivers a robust 2513 N push force at 0.5 MPa and operates with a PT3/8 port. Featuring a 1500 mm stroke, this unit is built for long-reach automation while maintaining strict VDMA 24562 dimensional interchangeability for seamless retrofits.
Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight spaces. The field-adjustable air cushion at both ends allows precise deceleration tuning to soften hard end stops. Note that this specific SKU lacks a built-in magnet, so position sensing via CMSE or DMSE switches is not supported without modification.
Airtac SE80 Standard Cylinder SE80X1500 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1500 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1500
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1500 Is Used
Palletizer Pusher
Drives heavy goods across palletizing lines using 2513 N push force over a 1500 mm reach.
Automotive Press Transfer
Moves large body panels between stamping stations, relying on the 36 mm adjustable cushion to stop smoothly.
Large Door Actuation
Opens industrial paint booth doors, utilizing the full 1500 mm stroke and 513 kgf maximum capacity.
Is the Airtac SE80 Standard Cylinder SE80X1500 the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N. For heavier loads, the 100 mm bore offers 3927 N. A plain SE cylinder drifts when air is lost or valves are centered, so if holding a load without live pressure is required, consider the BSE rod lock variant.
At 1500 mm, this stroke exceeds the standard maximum and is made-to-order. Such a long unsupported stroke subjects the Ø25 mm rod and bearing to significant bending forces. An external guide is strongly recommended to prevent side-load damage and ensure smooth operation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1500 FAQ
At 0.5 MPa, it provides 2513 N push and 2268 N pull. At 0.7 MPa, push is 3518 N. The maximum push is 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE80X1500 shares standard ISO 15552 / VDMA 24562 mounting dimensions, making it a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT3/8 port and M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.