Airtac SE80 Standard Cylinder SE80X150H
The AirTAC Airtac SE80 Standard Cylinder SE80X150H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X150H
The AirTAC SE80X150H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) across its 150 mm stroke. Equipped with a Viton (FKM) seal, this specific SKU withstands ambient heat up to 150 °C, expanding your operational range well beyond standard elastomers.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machinery spaces. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration precisely, softening hard impacts when moving heavy loads at speed. Note that this configuration ships without a sensor magnet.
Airtac SE80 Standard Cylinder SE80X150H Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X150H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X150H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X150H Is Used
Thermoforming Ejection
Executes the 150 mm extraction stroke to pull hot molded plastic parts from the oven zone, leveraging the 80 mm bore's 2513 N push force alongside the 150 °C FKM seal.
Glass Tempering Transfer
Moves heavy quartz or glass panels through high-temperature furnace feed lines, where the Viton seal survives radiated heat and the 36 mm cushion safely arrests the 2513 N thrust.
Hot Stamping Press Feed
Indexes aluminum billets into a heated forging die, using the robust 25 mm rod and M20x1.5 thread to maintain rigidity under high kinetic loads.
Is the Airtac SE80 Standard Cylinder SE80X150H the Right Cylinder?
Stepping down to a 63 mm bore drops the 0.5 MPa push to 1559 N, whereas moving up to a 100 mm bore increases it to 3927 N, letting you scale thrust precisely for your 80 mm application. As a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; for fail-safe load holding, consider the BSE rod lock variant. Because this is a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing the PT3/8 port, M20x1.5 rod thread, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X150H FAQ
This 80 mm bore cylinder provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and utilizes a high-temp FKM seal rated for environments up to 150 °C.
Yes, its standardized ISO 15552 mounting interface makes it dimensionally interchangeable with other ISO 15552 profile cylinders. However, the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If your application must hold a load without live air pressure, use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X150H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.