Airtac SE80 Standard Cylinder SE80X150SH
The AirTAC Airtac SE80 Standard Cylinder SE80X150SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X150SH
The AirTAC SE80X150SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding thermal environments. It generates a substantial 2513 N of push force at 0.5 MPa and 2268 N of pull force, making it well-suited for moving heavy jigs or actuating large press sub-assemblies. Equipped from the factory with FKM (Viton) seals, it reliably operates in ambient temperatures up to 150 C where standard elastomers would quickly degrade and fail.
Built with an extruded aluminum profile barrel free of external tie rods, this unit offers a sleek, corrosion-resistant exterior that mounts flush against machine frames while leaving three sensor channels exposed. The integrated -S magnet enables position detection via AirTAC CMSE reed or DMSE electronic switches, and the pneumatic cushioning at both ends is field-adjustable via a screw to soften hard end-stops during high-velocity cycling.
Airtac SE80 Standard Cylinder SE80X150SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X150SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X150SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X150SH Is Used
Thermoforming Mold Ejection
Utilizes the 2513 N push force and 150 mm stroke to eject heated plastic sheets from forming presses, where the FKM seal survives continuous ambient radiation up to 150 C.
Hot End Glass Handling
Actuates heavy transfer arms in glass container manufacturing, leveraging the robust 25 mm rod and M20x1.5 thread to withstand high inertia while DMSE sensors track position.
Shrink Wrap Frame Lowering
Lowers heavy stainless steel framing over shrink-wrap tunnels, using the field-adjustable end cushions to decelerate the 80 mm piston smoothly despite rapid cycling speeds.
Is the Airtac SE80 Standard Cylinder SE80X150SH the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your exact pressure and dynamic load requirements. If you need less force to save air consumption and envelope space, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa. Conversely, if your fixture demands more raw thrust, stepping up to the 100 mm bore provides a 3927 N push at 0.5 MPa. Keep in mind that a standard double-acting cylinder like this relies on continuous live air pressure to hold a load; if pilot pressure drops or the valve centers, the piston will drift, requiring a BSE rod-lock variant for safety holding. For an ISO 15552 retrofit, match the 150 mm stroke, PT3/8 port, appropriate mounting accessory, and -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X150SH FAQ
This 80 mm bore cylinder delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with an absolute maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X150SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface dimensions as other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit using your existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X150SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.