Airtac SE80 Standard Cylinder SE80X150SN
The AirTAC Airtac SE80 Standard Cylinder SE80X150SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X150SN
The AirTAC SE80X150SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. With an 80 mm bore, it generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing a 25 mm rod and M20x1.5 thread. The NBR seal provides reliable wear resistance for standard operating temperatures.
Built with an extruded aluminum barrel free of external tie rods, this profile body mounts flush and resists corrosion while housing sensor grooves on three sides. The included magnet enables precise position detection using CMSE reed or DMSE electronic switches. Furthermore, the field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X150SN Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X150SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X150SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X150SN Is Used
CNC Lathe Chuck Actuation
Provides the robust 2513 N push force required to open and close heavy pneumatic lathe chucks during bar feed operations.
Palletizer Flap Folding
Utilizes the 150 mm stroke and adjustable cushioning to fold corrugated box flaps smoothly at high cycle rates before sealing.
Heavy Sorter Diverter
Leverages the 80 mm bore power and NBR seals to drive heavy product diverters on high-throughput parcel sorting conveyors.
Is the Airtac SE80 Standard Cylinder SE80X150SN the Right Cylinder?
This 80 mm bore yields 2513 N push at 0.5 MPa; if your application requires less force, the 63 mm bore offers 1559 N, while stepping up to the 100 mm bore provides 3927 N. Remember that a standard SE cylinder will drift if air pressure is lost—use an AirTAC BSE rod lock for fail-safe holding. For ISO 15552 drop-in retrofits, match the 150 mm stroke, PT3/8 port, and mounting accessory, ensuring the -S magnet is specified for sensor tasks.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X150SN FAQ
At 0.5 MPa, it provides 2513 N push and 2268 N pull. At 0.7 MPa, push increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa, with a speed range of 30-800 mm/s.
Yes, the SE80X150SN is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting footprint, PT3/8 port, and 25 mm rod, allowing a drop-in replacement for other ISO 15552 profile cylinders without altering the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X150SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.