Airtac SE80 Standard Cylinder SE80X155SH
The AirTAC Airtac SE80 Standard Cylinder SE80X155SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke155 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X155SH
The AirTAC SE80X155SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature actuation. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a 25 mm rod with an M20x1.5 thread. Equipped with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C, making it ideal for hot environments where standard TPU seals would fail.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush while exposing sensor grooves on three sides. The integrated -S magnet pairs directly with AirTAC CMSE reed and DMSE electronic switches for precise end-of-stroke detection. Furthermore, field-adjustable pneumatic cushioning at both ends allows you to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X155SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X155SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X155SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X155SH Is Used
Injection Mold Ejection
Withstands ambient heat near molding presses while providing 2513 N of push force to eject heavy plastic parts, utilizing the Viton seal to resist thermal degradation.
Hot End Product Diverting
Handles high-temperature glass or metal components on a conveyor line, using the 155 mm stroke and DMSE electronic sensors for precise, heat-resistant sorting.
Thermoforming Press
Actuates forming tools in heated environments up to 150 C, relying on the adjustable end cushions to decelerate the 513 kgf max load smoothly at cycle end.
Is the Airtac SE80 Standard Cylinder SE80X155SH the Right Cylinder?
If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, whereas scaling up to the 100 mm bore provides a 3927 N push. This 80 mm model is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders while retaining the standardized mounting interface. It uses a PT3/8 port and includes the -S magnet and H high-temp seal.
Keep in mind that a plain SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant. Additionally, while the 25 mm rod handles standard side loads well, any stroke of 300 mm or more requires an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X155SH FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, acting as a drop-in replacement for other ISO 15552 profile cylinders. The H seal option provides Viton (FKM) elastomers, extending the operating temperature range up to 150 C for high-heat duty.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X155SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.