Airtac SE80 Standard Cylinder SE80X1600S
The AirTAC Airtac SE80 Standard Cylinder SE80X1600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1600S
The AirTAC SE80X1600S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding industrial tasks, delivering a robust 2513 N push force at 0.5 MPa. Driven by a 25 mm hard-chrome plated rod with an M20x1.5 thread, it handles substantial axial loads. Because the stroke is 1600 mm, this specific unit is a non-standard, made-to-order configuration exceeding the 1500 mm standard limit.
Built with a square extruded aluminum barrel free of external tie rods, the body is highly corrosion-resistant and mounts flush against machine frames. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to dial in deceleration and soften hard end stops during high-speed operations.
Airtac SE80 Standard Cylinder SE80X1600S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1600S Is Used
Bottling Line Diversion
Leveraging the 2513 N push force and 1600 mm stroke, this cylinder drives large diverter gates on high-speed beverage bottling conveyors, requiring the -S magnet to trigger DMSE sensors for timing.
Wood Panel Pressing
Provides reliable 3518 N thrust at 0.7 MPa for pressing and aligning long wood panels in CNC routing cells, utilizing the full extended reach to span wide workbeds.
Palletiser Strapping
Actuates the strapping and sealing head mechanism on automated palletisers, where the extruded no-tie-rod profile prevents dust buildup and eases flush mounting.
Is the Airtac SE80 Standard Cylinder SE80X1600S the Right Cylinder?
For sizing flexibility, consider stepping down to a 63 mm bore if your application only requires 1559 N of push force at 0.5 MPa, or stepping up to a 100 mm bore for a heavier 3927 N thrust. As a standard ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware like FA front flanges or TC centre trunnions. The port size is PT3/8.
Because this model features a 1600 mm stroke, the unsupported rod length during extension is substantial. Even with the rigid 25 mm rod and M20x1.5 thread, long strokes invite rod-bearing bending under side loads; an external guide mechanism is strongly recommended to prevent premature seal wear. Note that the adjustable air cushion decelerates the piston near stroke end but does not lock or hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1600S FAQ
The 80 mm bore generates a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
Yes, as a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, matching standard mounting dimensions and port locations (PT3/8) for easy retrofits without custom brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.