Airtac SE80 Standard Cylinder SE80X160SCB
The AirTAC Airtac SE80 Standard Cylinder SE80X160SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X160SCB
The AirTAC SE80X160SCB is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty actuation, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This 80 mm bore unit includes a built-in position magnet for CMSE or DMSE sensors and a CB double clevis mount for pivoting articulation. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration precisely, absorbing kinetic energy smoothly rather than relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80X160SCB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X160SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X160SCB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X160SCB Is Used
Press Brake Tonnage
Drives the upper beam on mid-capacity metal press brakes, utilizing the 2513 N push force to form heavy-gauge sheet metal accurately over the 160 mm stroke.
Pallet Dispenser Gate
Actuates the release gate on automated pallet dispensers, where the CB clevis accommodates the pivot arc and the robust 80 mm bore handles empty pallet stack weight.
Injection Mold Ejection
Functions as a heavy-duty ejector on injection molding machines, using the DMSE electronic sensor feedback to confirm part ejection at the end of the stroke.
Is the Airtac SE80 Standard Cylinder SE80X160SCB the Right Cylinder?
Selecting this 80 mm bore makes sense when a 63 mm cylinder (providing 1559 N push at 0.5 MPa) is underpowered, but stepping up to a 100 mm bore (3927 N push at 0.5 MPa) would be physically oversized. The CB rear clevis accessory is ideal for articulating loads that require angular alignment during the 160 mm stroke.
Because this is a double-acting cylinder, it relies on continuous air pressure to maintain its position; if air is lost or the valve centers, the piston will drift, so a BSE rod lock variant is required for true fail-safe holding. Dimensionally interchangeable per ISO 15552, it drops directly into existing footprints sharing the standard PT3/8 port and M20x1.5 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X160SCB FAQ
The SE80X160SCB generates a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X160SCB is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting dimensions, PT3/8 ports, and an M20x1.5 rod thread with other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X160SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.