Airtac SE80 Standard Cylinder SE80X180S
The AirTAC Airtac SE80 Standard Cylinder SE80X180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X180S
The AirTAC SE80X180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) across a 180 mm stroke, utilizing a 25 mm piston rod and PT3/8 port. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames.
Equipped with a built-in magnet (-S), this model directly supports AirTAC CMSE reed and DMSE electronic position sensing for precise end-of-stroke verification. The field-adjustable air cushioning at both ends allows technicians to dial in end-stop deceleration via a set screw, softening impacts during high-speed operations rather than relying on a fixed rubber bumper.
Airtac SE80 Standard Cylinder SE80X180S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X180S Is Used
Corrugated Box Forming
Provides the 2513 N push force required to fold and seal heavy corrugated cartons on a high-speed packaging line, using the 180 mm stroke to clear the product path during retraction.
Press Brake Demolding
Exerts controlled 0.5 MPa clamping pressure to hold steel sheets against a press brake die, while the DMSE electronic sensors confirm mold closure before the hydraulic press cycles.
Injection Mold Ejection
Drives a 180 mm stripper plate forward to eject formed plastic parts from an injection mold, relying on adjustable end cushions to soften the plate impact at high cycling speeds.
Is the Airtac SE80 Standard Cylinder SE80X180S the Right Cylinder?
Generating 2513 N of push at 0.5 MPa, this 80 mm bore is ideal for medium-to-heavy actuation. If your fixture is overpowered, stepping down to the 63 mm bore drops the output to 1559 N push, saving air volume. If you need more brute force, stepping up to the 100 mm bore increases the push to 3927 N. Because this is a 180 mm stroke, side-loading on the rod bearing is moderate; ensure your load guide is rigid to prevent premature seal wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing standard mounting hardware. Note that the adjustable cushion only decelerates the piston near the stroke ends; it cannot hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X180S FAQ
At 0.5 MPa, the SE80X180S delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE80X180S features a standard ISO 15552 / VDMA 24562 mounting interface and a PT3/8 port, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can reuse your existing mounting brackets and drop it directly into the same footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.