Airtac SE80 Standard Cylinder SE80X190S
The AirTAC Airtac SE80 Standard Cylinder SE80X190S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke190 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X190S
The AirTAC SE80X190S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while simplifying sensor placement.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, smoothly absorbing kinetic energy from heavy 80 mm payloads traveling up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X190S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X190S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X190S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X190S Is Used
Pallet Divertor Arms
Drives heavy diverter arms on 1.5 m wide packaging conveyors, utilizing the 2513 N thrust to push fully loaded pallets onto secondary transfer lines.
Corrugated Box Press
Actuates the top folding platen on automated case sealers, where the 190 mm stroke accommodates varying box heights and the adjustable cushion prevents crushing the cardboard.
Injection Mold Ejection
Provides the primary ejection stroke for heavy plastic injection molds, using the DMSE electronic sensor to confirm the 80 mm platen is fully retracted before the mold closes.
Is the Airtac SE80 Standard Cylinder SE80X190S the Right Cylinder?
Selecting the SE80X190S gives you 2513 N of thrust at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push; conversely, moving up to the 100 mm bore provides 3927 N push. Because this is a 190 mm stroke, the 25 mm piston rod and M20x1.5 thread provide a rigid interface, though any long unsupported payload should still rely on an external guide to prevent rod-bearing bending.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 cylinders using the existing PT3/8 porting and mounting hardware. Note that while the adjustable cushion softens hard end stops, a plain SE cylinder does not hold its load if air pressure is lost; applications requiring dead-end positioning will need a BSE rod lock or external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X190S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X190S is dimensionally interchangeable per ISO 15552. It shares the standardized mounting footprint and PT3/8 port size, allowing it to serve as a direct drop-in replacement for other ISO 15552 profile cylinders without altering the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.